EMEM1103 Datasheet, PDF (1/4 Pages) EUROQUARTZ limited – Low Jitter Precision LVDS Oscillator

EURO QUARTZ ^{EMEM1103/1123 - MEMS OSCILLATOR}
Low Jitter Precision LVDS Oscillator
2.3MHz to 460.0MHz
Features
Frequency Range 2.3MHz to 460MHz
Frequency Stability ±10, ±25 or ±50ppm
Operating Voltage: 1.71V to 3.60V
Operating Temperature Range
Industrial: -40° to +85°C
Ext. Commercial: -20° to +70°C
High Supply Noise Rejection: -50dBc
Short Lead Time
Ultra-Miniature Footprints
2.5 x 2.0 x 0.85mm
3.2 x 2.5 x 0.85mm
5.0 x 3.2 x 0.85mm
7.0 x 5.0 x 0.85mm
Excellent Shock & Vibration Resistance
Qualified to MIL-STD-883
High Reliability
Low Current Consumption
Supply Voltage from 2.25 to 3.6 Volts
Standby and Output Enable Function
LVPECL and HCSL versions available
Electrical Specifications
Page 1 of 4
Description
The Euroquartz EMEM1103 and EMEM1123 series of high performance
oscillators utilize MEMS (Micro Electro-Mechanical System) technology,
offering excellent jitter and stability performance over a wide range of
supply voltages and temperature ranges. The EMEM1103 has a standby
feature allowing it to completely power down when the 'EN' pin is
pulled low; the EMEM1123 outputs are disabled when EN is low.
Both oscillators are available in industry-standard oscillator packages,
including the small 2.5 x 2.0mm and are 'drop-in' replacements for
standard LVDS output quartz crystal oscillators.
Parameter
Supply Voltage¹
Supply Current
Frequency Stability
Ageing
Startup Time²
Input Logic Levels
Input Logic High
Input Logic Low
Output Disable Time³
Output Enable Time
Enable Pull-up Resistor
Supply Current
Output Offset Voltage
Delta Offset Voltage
Pk to Pk Output Swing
Output Transition Time³
Rise Time
Fall Time
Frequency
Output Duty Cycle
Period Jitter
Integrated Phase Noise
Symbol
Condition
EN pin low - outputs disabled
I^DD
EMEM1103
EMEM1123
Includes frequency variations due
∆f
to initial tolerance, temp. and
power supply voltage.
∆f
1 year @ 25°
T^SU
T = 25°C
Min.
2.25
V^IH
V^IL
T^DA
T^EN
I^DD
V^OS
∆V^OS
t^R
t^F
f⁰
SYM
J^PER
J^PH
0.75*V^DD
EMEM1103
EMEM1123
Pull-up resistor exists
LVDS Outputs
Output Enabled, R^L = 50Ω
R = 100Ω Differential
Single-Ended
20% to 80%
R^L = 50Ω, C^L = 2pF
Single Frequency
2.3
Differential
48
200kHz to 20MHz @156.25MHz
100kHz to 20MHz @156.25MHz
12kHz to 20MHz @156.25MHz
Typ.
20
40
29
350
200
2.5
0.28
0.4
1.7
Notes:
1. Pin 6 V^DD should be filtered with 0.1µF capacitor.
2. t^SU is time to 100ppm of output frequency after V^DD is applied and outputs are enabled.
3. Output waveform and test circuit figures below define the parameters.
4. Output is enabled if pad is floated or not connected.
Max.
3.6
0.095
22
±10
±25
±50
±5
5
0.25*V^DD
5
5
20
32
1.4
50
460
52
2
Unit
V
mA
ppm
ppm
ms
V
ns
ms
ns
kΩ
mA
V
mV
mV
ps
MHz
%
ps^RMS
ps^RMS
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] Email: [e-mail] www.euroquartz.co.uk