5LPO42-C7-32.768K Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – LOW POWER CONSUMPTION OSCILLATORS

LOW POWER CONSUMPTION OSCILLATORS
LPO 42 SERIES, Model 7
4 pad SMD Package
OUTLINES AND DIMENSIONS
DESCRIPTION
The Euroquartz LPO42 series of low power consumption oscillators are
ideal parts providing the time base signals for real-time clocks. The
oscillators have very low current consumption (as low as 14mA) and are
ideal for battery operated devices such as data logging and portable test
equipment.
FEATURES
· Very low current consumption from 14mA
· Industry-standard 4 pad SMD package
· Wide frequency range, from 1Hz to 160kHz
· Supply Voltage from 2.0 Volts to 15.0 Volts
· Standard CMOS output
SPECIFICATION
Input Voltage:
Frequency Range:
Output Logic:
Output Voltage
CMOS HIGH’1’:
CMOS LOW ‘0’:
Calibration Tolerance:
Frequency Stability:
Current Consumption:
Rise/Fall Times:
Start-up Voltage:
Pin 1 Option, Tristate:
Duty Cycle:
Start-up Time:
Storage Temperature:
Ageing:
+3.3 VDC
+5.0VDC
+2.0 Volts to +7.0 Volts is available
20kHz to 160kHz
(Limited to standard frequencies.)
CMOS
2.97V min.
4.0V min.
0.33V max.
0.4V max.
see table opposite
see curve opposite
14mA typical
18mA typical
25ns typical, 45ns maximum
(Measured from 10%Vdd to 90%Vdd)
1.60 VDC
Output is high impedance when LOW
50%±5% typical, 50%±10% maximum
450ms maximum
-50° to +100°C
±5ppm maximum at 25°C
FREQUENCY DEVIATION vs TEMPERATURE
CURRENT CONSUMPTION vs SUPPLY VOLTAGE
CALIBRATION TOLERANCE
Euroquartz
Part Number
Suffix
P
A
B
C
Cailbration
Tolerance
at 25°C
±10ppm
±25ppm
±50ppm
±100ppm
PART NUMBER GENERATION
LPO oscillators part numbers are derived as follows:
EXAMPLE:
5LPO42 -C7-32.768k
kHz RANGE OSCILLATORS mA CURRENT CONSUMPTION
If you require oscillators in the kHz frequency range with mA current
consumption please see our standard CMOS oscillator range.
STOCK HOLDING AND CUSTOM PARTS
Euroquartz maintain a large stock of standard frequency and specification
oscillators. If you require custom frequencies and/or specification
oscillators, Euroquartz will manufacture in-house with short delivery
Voltage Code
‘5’ = 5 Volts
‘3’ = 3 Volts (etc.)
Package Code
LPO42 = 4 pad SMD
Calibration Tolerance
P, A, B or C
Model Code
4 or 7
Frequency
k = kHz, H = Hz
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: [phone] Fax: [phone] email: [e-mail] web: www.euroquartz.co.uk