FRM5N141GW Datasheet, PDF (1/4 Pages) Eudyna Devices Inc – InGaAs-APD/Preamp Receiver

InGaAs-APD/Preamp
Receiver
FRM5N141GW
FEATURES
• Small Form Factor Package(GW): 9 pins coplanar
• Integrated Design Optimizes Performance at
Bit Rates up to 12.5Gb/s
• High Sensitivity: -27dBm (typ.)
• Electrical Differential Output
• Wide Bandwidth: 10.5GHz (typ.)
• Operates in both C and L wavelength bands
APPLICATIONS
This APD with HBT preamplifier is intended to function as an optical receiver
at 1,310nm or 1,530-1,610nm in SONET, SDH, DWDM or other optical fiber
systems operating up to 12.5Gb/s. The typical transimpedance (Zt) value
of 1,300Ω optimizes the total bandwidth for 10Gb/s application. The detector
preamplifier is DC coupled and has an electrical differential output.
DESCRIPTION
The FRM5N141GW incorporates a high bandwidth InGaAs APD photo diode, a GaAs
HBT IC amplifier in a hermetically sealed Small Form Factor package (SFF). The APD is
processed with modern MOVPE techniques resulting in a reliable performance over a wide
range of operating conditions. The lens coupling system and the single mode fiber are
assembled using Nd YAG welding.
ABSOLUTE MAXIMUM RATINGS (Tc=25°C)
Parameter
Symbol
Ratings
Storage Temperature
Tstg
-40 to +85
Operating Temperature
Top
-5 to +75
Supply Voltage
Vss
-6 to 0
PIN Reverse Voltage
VR
0 to VB(Note)
PIN Reverse Current
IR_(peak)
3
Note: Since VB may vary from device-to-device, VB data is attached to each device for reference.
Unit
°C
°C
V
V
mA
Edition 1.3
January 2003
1