FRM3Z231KT Datasheet, PDF (1/5 Pages) Eudyna Devices Inc – InGaAs-PIN/Preamp Receiver

InGaAs-PIN/Preamp
Receiver
FRM3Z231KT/LT
FEATURES
• Data rate up to 2.5Gb/s
KT
• -23dBm typ. sensitivity
• 30µm active area PIN chip with GaAs pre-amplifier
• Small co-axial package with multi-mode fiber
APPLICATIONS
• High bit rate short haul optical transmission systems
operating at 2.5Gb/s
DESCRIPTION
These PIN preamplifiers use an InGaAs PIN chip with
GaAs IC preamplifier. The KT package is designed for a
horizontal PC board mount. The LT package is secured by a
LT
vertical flange. Each package is connected with
multi-mode fiber by Nd: YAG welding. The detector
preamplifier is DC coupled and has a low electrical
output when the PIN is illuminated. These devices
are in compliance with ITU-T Recommendations
and meet Bellcore Requirements.
Edition 1.0
March 1999
1