F20 Datasheet, PDF (91/111 Pages) List of Unclassifed Manufacturers – 8-ch normal DMA controllers and 8-ch dedicated DMA controllers

Boxchip F20 Datasheet
29.
29.1.
CAN Bus
CAN Overview
The CAN module is a controller for the Controller Area Network (CAN) used in automotive
and general industrial environments. It implements the CAN 2.0A/B protocol as defined in the
BOSCH CAN bus specification 2.0.
The CAN controller includes the following features:
 Supports the CAN 2.0A and 2.0B protocol specification
 Programmable data rate up to 1Mbps
 64 byte receive buffers
 Support one-shot transmission option
 Supports two configurable filter modes
 Supports listen only mode
 Supports self-test mode
29.2. CAN Bus Signal Description
Signal
Name
Table 29-1. CAN Bus Signal Description
Description
Type
CAN_TX CAN Transmit Data
O
CAN_RX Can Receive Data
I
Pin
Name
PH20
PA16
PH21
PA17
Ball#
H6
V10
H5
W10
Boxchip. All rights reserved.
Ver 1.01
Page 91