R141004000 Datasheet, PDF (9/35 Pages) List of Unclassifed Manufacturers – Worlwide standardised coaxial connectors

CHARACTERISTICS
Test/characteristics
Standard
reference
ELECTRICAL CHARACTERISTICS
Impedance
Frequency range
Typical V.S.W.R.
straight models cable groupe: 2/50, 2.6/50, 5/50,
10 + 11/50, .141"
right angle models: 2/50, 2.6/50, 5/50
Insertion loss
s traight connector
RF leakage
right-angle connector
Insulation resistance
Contact resistance
center contact
outer contact MIL
Working voltage in VRMS
at sea level
(at 21 000m)
Dielectric withstanding voltage in VRMS
at sea level
(at 21 000m)
RF testing voltage in VRMS
sea level (5 MHz)
Values/remarks
1 GHz
1.12
1.13
0.05
0.08
50Ω
DC - 4 GHz
2.5 GHz
1.18
1.30 max
1.20
0.07
0.16
-55 dB min from 2 to 3 GHz
5000 MΩ min
4 GHz
1.22
1.22
0.13
0.20
1.5 mΩ
0.2 mΩ
500
125
1500
375
1000
MECHANICAL CHARACTERISTICS
Durability
Force to engage and disengage axial
torque
Coupling nut retention force
MIL
Cable retention force cable 2/50, 2.6/50
cable 5/50, 10 + 11/50
cable .141"
Center contact retention force
500 matings
13.6 N max
28.6 Ncm
445 N
227 N
27.2 N
ENVIRONMENTAL CHARACTERISTICS
Temperature range
Thermo cycling test
flexible cables
semi-rigid cables
-65°C + 165°C
-65°C + 105°C
MIL STD 202, method 107, condition B
Thermal shock
High temperature endurance
MIL STD 202, method 107, condition B
MIL STD 202, method 108
Corrosion salt spray
Vibration
Shock
MIL
MIL STD 202, method 101, condition B
MIL STD 202, method 204, condition B
MIL STD 202, method 213, condition G
Moisture resistance
Hermetic test
Barometric pressure
MIL STD 202, method 106
MIL STD 202, method 112, condition C
vacuum 10^-6 Hgmm (Torr) leakage rate < 10^-6 atm/cm³/s
Pressure test: 3.5 bars; duration: 2 mn; temperature: 15°C to 25°C
MATERIALS and PLATING
Bodies
Center contact
Nut
Insulator
Gasket
male
female
Materials
Brass
Brass
Bronze or heat treated beryllium following QQ-C-530
Brass
PTFE
Silicon Rubber
Platings
Nickel / BBR
Gold
All dimensions are given in mm.
10-9
www.radiall.com