PLB124050 Datasheet, PDF (9/10 Pages) List of Unclassifed Manufacturers – Industry standard 3020 in PLCC-2

Reflow Soldering Profile
1. Reflow soldering should not be done more than twice
2. When soldering, do not put stress on the LEDs during heating
Soldering iron
1. When hand soldering, the temperature of the iron must less than +300ºC for 3
seconds
2. Hand soldering should be performed only once.
PLESSEY| TAMERTON ROAD | ROBOROUGH | PLYMOUTH | DEVON | PL6 7BQ
Phone: [phone]
Fax: [phone]
Web: www.plesseysemi.com
Datasheet No 292577 Issue 1
Page 9 of 10