MI20 Datasheet, PDF (9/16 Pages) List of Unclassifed Manufacturers – Compact Flash Card Connectors

sHeaders for Type I or II Cards
qEject button : Left side
qOffset
: None
qMounting style : Standard mounting
Note 1: This item is a (standard type) header for use with CompactFlash cards.
Note 2: The dimensions of mating portion of this product comply with CFA standards.
Note 3: This product can be automatically mounted. The suction surface for automatic mounting is positioned as illustrated in the figure.
3 This part is fixed in the initial condition, but released with a single operation of the ejector.
(Amount of actual card ejection: 3.5 mm)
Note 4: The coplanarity (degree of flatness) of the SMT lead tip portion and the reinforced fitting mounting end face is to be 0.1 maximum.
Note 5: Dimensions in parentheses ( ) are to be regarded as reference dimensions.
Part Number
MI21-50PD-SF-EJL
CL No.
640-7108-3
BPCB mounting pattern
Number of Contacts
50
Packaging
Tray
Note 1
The
holes
(2-Ø2.4
+0.1
0
)
illustrated
in
the
figure
are
only
required
when
screws
are
used
for
fastening.
C10