13-142 Datasheet, PDF (75/282 Pages) List of Unclassifed Manufacturers – High-Speed Interconnect Technology

Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 Ω Applications
■ Solderless, Press-Fit Installation.
■ Strong, One-Piece Cast Body.
■ Standard BNC Interface.
■ 75Ω Impedance.
■ Meets Lucent Technologies (AT&T) Requirements.
Body: One-piece diecast zinc per QQ-Z-363
Plating: Nickel, 150µin. min. per QQ-N-290 over copper, 200µin.
min. per MIL-C-14550
Center Contact: Beryllium copper
Plating: Gold, 30µin. minimum over nickel, 50µin. minimum
Insulator: Teflon TFE per ASTM D1710
Impedance:
Frequency Range:
RF Leakage:
Insertion Loss:
VSWR:
Working Voltage:
Insulation Resistance:
75Ω
0 to 4 GHz
> -55 dB
.2dB maximum @ 2 GHz
1.024
< 500 VAC RMS @ sea level
> 5000 MOhms @ 500 VDC
Connector Insertion Force: <500 lb.*
Connector Removal Force: >100 lb.*
Center Contact Insertion Force: < 2.0 lb.*
Center Contact Removal Force: > 2.0 oz.*
*Requirements are for two connector insertions into the same PC board
mounting holes. PC board thickness can range from .093" to .300" thick.
PC board hole requirements are as follows:
Ground Legs: .059" Nom.
Center Contact: .040" Nom.
Compliant version,
Pt. No. 299 99 00 134
is also available.
For more information please
contact us at 1-800-323-9612
Unique patented press-fit connector design
allows for multiple insertions into a backplane
without loss of mechanical retention or electrical
performance.
The design requirements for nominal PC board
mounting holes and thickness are as follows:
Insertion Forces:
.093 Board Thickness: 200 lb. max.
.250 Board Thickness: 500 lb. max.
Withdraw Forces:
.093 Board Thickness: 100 lb. max.
.250 Board Thickness: 200 lb. max.
The Cinch Press-Fit BNC surpasses these
requirements with a unique, non-symmetrical
ground leg design. This design allows the
connector to be inserted, removed, rotated 180^o,
and reinserted into the same location on the
board without loss of mechanical or electrical
performance.
Call Toll Free: 1 [phone]
2-76