BMA222E Datasheet, PDF (70/119 Pages) List of Unclassifed Manufacturers – Digital, triaxial acceleration sensor

BMA222E
Data sheet
Page 70
Register 0x1A (INT_MAP_1)
Controls which interrupt signals are mapped to the INT1 and INT2 pins.
Name
Bit
Read/Write
Reset
Value
Content
0x1A
7
R/W
0
int2_data
Bit
Read/Write
Reset
Value
Content
3
R/W
0
reserved
INT_MAP_1
6
R/W
0
int2_fwm
2
R/W
0
int1_ffull
5
R/W
0
int2_ffull
1
R/W
0
int1_fwm
4
R/W
0
reserved
0
R/W
0
int1_data
int2_data:
int2_fwm:
int2_ffull:
reserved:
int1_ffull:
int1_fwm:
int1_data:
map data ready interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
map FIFO watermark interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
map FIFO full interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
write ‘0’
map FIFO full interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
map FIFO watermark interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
map data ready interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
BST-BMA222E-DS004-04 | Revision 1.1 | December 2013
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.