PD064VT8 Datasheet, PDF (7/22 Pages) –

P-511-476(V:4)
PD064VT8
Note 5-2 : DENB input signal.
If customer wanted to off the DENB mode , you must keep the DENB (pin 27) always
High or Low.
800 tc
640 tc
DENB
(tc: the period of sampling clock)
Note 5-3: V_{CC (}TYP.)=+5V
Note 5-4: The definitions of U/D & R/L
R/L(PIN 30)= High , U/D(PIN 31)= Low
R/L(PIN 30)= Low , U/D(PIN 31)= High
5-2) Backlight driving connector: JST BHSR-02VS-1 , 2 Pins
Pin No
Symbol Description
1
+
Input terminal (Anode)
2
-
Input terminal (Cathode)
Remark
Red
Black
6. Absolute Maximum Ratings :
The followings are maximum values , which if exceeded, may cause faulty operation or damage to
the unit.
GND=0V, Ta=25℃
Parameters
Supply Voltage
Input Signals Voltage
Storage Temperature
Operation Temperature
Symbol MIN.
MAX.
Unit
V_CC
-0.3
+7.0
V
V_-sign
-0.3
V_CC+0.3
V
Tst
-30
+80
℃
Top
-30
+80
℃
Remark
Note 6-1
Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5].
The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced,
or disclosed in whole or in part without prior written permission of E Ink Holdings Inc.
Page:7