3005073 Datasheet, PDF (7/10 Pages) List of Unclassifed Manufacturers – Extract from the online catalog

UK 10 N
Accessories
Item
Assembly
3003224
3022218
3003020
3003101
1201442
1201028
1201280
1201358
1201002
1201015
0801762
0801733
0801681
1201756
1201895
1201730
1201714
1201798
0204110
1302215
Bridges
0203153
0203328
0203137
0203195
0203140
Designation
Description
ATP-UK
CLIPFIX 35
D-UK 4/10
D-UK 4/10 BU
E/UK
NS 32 AL UNPERF 2000MM
NS 32 CU/120QMM UNPERF
2000MM
NS 32 CU/35QMM UNPERF
2000MM
NS 32 PERF 2000MM
NS 32 UNPERF 2000MM
NS 35/ 7,5 CU UNPERF
2000MM
NS 35/ 7,5 PERF 2000MM
NS 35/ 7,5 UNPERF 2000MM
NS 35/15 AL UNPERF
2000MM
NS 35/15 CU UNPERF
2000MM
NS 35/15 PERF 2000MM
NS 35/15 UNPERF 2000MM
NS 35/15-2,3 UNPERF
2000MM
STL 10N/5N
TS-K
Separating plate, for visual and electrical separation of terminal
groups, width: 1.5 mm, color: Gray
Snap-on end bracket, for 35 mm NS 35/7.5 or NS 35/15
mounting rail, can be fitted with Zack strip ZB 8 and ZB 8/27,
terminal strip marker KLM 2 and KLM, width: 9.5 mm, color: gray
Cover, width: 1.8 mm, color: gray
Cover, width: 1.8 mm, color: blue
End clamp, for supporting the electronic base. If mounted
vertically, 2 end clamps are required in each case
G rail 32 mm (NS 32)
G-profile DIN rail, deep-drawn, material: Copper, unperforated,
height 15 mm, width 32 mm, length 2 m
G-profile DIN rail, material: Copper, unperforated, height 15 mm,
width 32 mm, length 2 m
G-profile DIN rail, material: Steel, perforated, height 15 mm,
width 32 mm, length 2 m
G-profile DIN rail, material: Steel, unperforated, height 15 mm,
width 32 mm, length 2 m
DIN rail, material: Copper, unperforated, height 7.5 mm, width
35 mm, length: 2 m
DIN rail, material: Steel, perforated, height 7.5 mm, width 35
mm, length: 2 m
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35
mm, length: 2 m
DIN rail, deep-drawn, high profile, unperforated, 1.5 mm thick,
material: Aluminum, height 15 mm, width 35 mm, length 2 m
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15
mm, width 35 mm, length: 2 m
DIN rail, material: Steel, perforated, height 15 mm, width 35 mm,
length: 2 m
DIN rail, material: Steel, unperforated, height 15 mm, width 35
mm, length: 2 m
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15
mm, width 35 mm, length: 2 m
Step bracket, 2-pos.
Separating plate, for electrical separation of neighboring bridges,
can be fitted later, no loss of pitch, color: Gray
EB 2-10
EB 3-10
EB 10-10
FB 2-10
FB 3-10
Insertion bridge, 2-pos., fully insulated
Insertion bridge, 3-pos., fully insulated
Insertion bridge, 10-pos., divisible, fully insulated
Fixed bridge, 2-pos., divisible, with screws, screw heads without
insulation
Fixed bridge, for cross connections, with screws, screw heads
without insulation, 3-pos.
PHOENIX CONTACT GmbH & Co. KG
http://www.phoenixcontact.com
Page 7/10
Oct 25, 2006