0462-201-20141 Datasheet, PDF (7/8 Pages) List of Unclassifed Manufacturers – HD30 & HDP20 Series Technical Manual

HD30 & HDP20 Series Technical Manual
Receptacle Mounting
LOCKWASHER
PANEL NUT
FLAT
STRUCTURE
CONNECTOR RECEPTACLE
A0+.005 (0.13)
B ^{+.010 (0.25)}
-.000 (0.00)
RECOMMENDED SIZE OF
MOUNTING HOLE
SHELL SIZE
A0
B
18
1.507
1.442
(38.28)
(36.63)
24
1.696
(43.08)
1.632
(41.45)
.1875 (4.76)
.0625 (1.59)
“D” Hole Punches available from: LADD Industrial Sales.
Mating / Unmating Instructions
To mate the plug and the receptacle, line up the index groove on the plug with the flat surface on the receptacle, turn 1/4 turn clockwise. You
will feel and hear the pieces snap into the locked position. To unmate the plug and receptacle, reverse the above procedure.
VISUALLY INSPECTABLE
FOR PROPER MATING
POLARIZING INDICATOR
HDP20 SERIES & HD30 SERIES
MATE
UNMATE
CAUTION: When mating or unmating plug and receptacle, disassemble by hand. DO NOT use pliers or any other tool.
12
A STEP AHEAD
HD30 & HDP20 Series Technical Manual
CONTACT INSERTION
UNLOCKING FINGERS
CONTACT
ASSEMBLY INSTRUCTIONS
CONTACT REMOVAL
UNLOCKED POSITION
Contact Insertion
CONTACT LOCKED IN POSITION
TOOL INSERTED TO
UNLOCK CONTACT
TOOL AND CONTACT
REMOVED
1 Grasp contact approximately (25.4
mm) one inch behind the contact
crimp barrel.
2 Hold connector with rear grommet
facing you.
NOTE: For unused wire cavities, insert
sealing plugs for full environmental
sealing.
3 Push contact straight into connector
grommet until a positive stop is felt.
A slight tug will confirm that it is
properly locked in place.
Contact Removal
1 With rear insert toward you, snap
appropriate size extractor tool over
the wire of contact to be removed.
2 Slide tool along into the insert
cavity until it engages contact and
resistance is felt.
NOTE: Do not twist or insert tool at an angle.
3 Pull contact-wire assembly out of
connector.
Removal Tools
Sealing Plugs
NORMAL WIRE SEALS (N)
EXTRA THIN WALL WIRE SEALS (E)
SEALING PLUG
PART NO.
SIZE WIRE RANGE AWG PART NO.
SIZE WIRE RANGE AWG CONTACT SIZE
0411-240-2005 20
0411-204-1605 16
114010
12
114008
8
114009
4
20-22
14-20
12-14
8-10
6
0411-240-2005 20
0411-336-1605 16
0411-337-1205 12
0411-353-0805 8
114009
4
20-22
14-20
12-14
8-10
6
20
12-16
8
4
THIN WALL WIRE SEALS (T)
0411-310-1605 16
14-20
PART NO.
0413-204-2005
114017
114018
114019
13
A STEP AHEAD