ZSSC3123 Datasheet, PDF (64/68 Pages) List of Unclassifed Manufacturers – Capacitive Sensor Signal Conditioner

ZSSC3123
cLite™ Capacitive Sensor Signal Conditioner
9 Pin Configuration and Package
The standard package for the ZSSC3123 is a TSSOP-14 (4.4±0.1mm body wide) with lead-pitch 0.65mm. See
the notes in Table 9.2 regarding connection requirements.
Table 9.1 Storage and Soldering Condition
Maximum Storage Temperature
Minimum Storage Temperature:
Maximum Drybake Temperature
Soldering Peak Temperature
Storage and Soldering TSSOP14
Tmax_storage Less than 10hrs, before mounting
Tmin_storage at original packing only
-55
Tdrybake
Less than100hrs in summary,
before mounting
Tpeak
Less than 30s
(IPC/JEDEC-STD-020 Standard)
Figure 9.1 ZSSC3123 Pin-Out Diagram
1
14
2
13
3
12
4
11
5
10
6
9
7
8
150
C
C
125
C
260
C
Table 9.2 ZSSC3123 Pin Assignments for TSSOP-14
Pin
Name
Description
1
VCORE Core voltage
2
C0
3
VSS
4
CC
Capacitor input 0
Ground supply
Common capacitor input
Notes
Always connect to an external
capacitor to Gnd that is within the
specifications given in section 1.3 for
C_{VCORE_SM} and C_{VCORE_UM}. This is the
only internal module pin. Refer to
section 8 for ESD details.
Connecting to GND for shielding is
strongly recommended.
Data Sheet
September 29, 2011
© 2011 Zentrum Mikroelektronik Dresden AG — Rev.1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used
without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes
without notice.
64 of 67