E2013 Datasheet, PDF (6/6 Pages) List of Unclassifed Manufacturers – Distinctive Characteristics

Standard Hardware
2 AT513M Metric Hexagon Nuts
1 AT507M Metric Locking Ring
1 AT509 Internal Tooth Lockwasher
Lockwasher
Lock Nut
Face Nut
Locking Ring
Light Duty Miniature Toggles Series E
STANDARD HARDWARE
AT513M Metric
Hexagon Nut
Material:
Brass with
Nickel Plating
M6 P0.75
(8.0)
.315
AT507M Metric
Locking Ring
Material:
Steel with Zinc/Chromate
(6.0) Dia
.236
(12.0) Dia
(2.0)
.472
.079
(5.5)
.217
AT509
Lockwasher
Material:
Steel with Zinc/Chromate
(6.4) Dia
.252
(10.2) Dia
.402
(9.0)
(1.5)
(1.7)
(0.8)
(0.5)
.354 .059
.067
.031
.020
Optional hardware available. See Accessories & Hardware section.
Panel Thicknesses & Panel Cutouts
With Standard Hardware
Without Locking Ring
Maximum Effective Panel Thickness:
.087” (2.2mm)
Maximum Effective Panel Thickness:
.118” (3.0mm)
(6.5) Dia
(6.5)
.256
.256
(2.2) Dia
.087
Without Bottom Hex Nut
Maximum Effective Panel Thickness:
.154” (3.9mm)
(6.35) Dia
.250
(5.6)
.220
(0.6)
.024
(6.35) Dia
.250
Without Locking Ring & Bottom Hex Nut
Maximum Effective Panel Thickness:
.185” (4.7mm)
AT428M (Metric)
Boot for Bat Toggle
Material: Silicone Rubber
OPTIONAL SPLASHPROOF BOOT
(9.8)
(11.3) ^.386
(14.3) ^.445
.563
(4.6) Dia
.181
(6.7) Dia
.264
(10.8)
.425
(2.0)
.079
~.(029.58)
(1.57)
.062
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com
2-06