DS_USB_RS232_PCB Datasheet, PDF (6/16 Pages) List of Unclassifed Manufacturers – Future Technology Devices International Ltd USB to RS232 UART Serial Converter PCB Datasheet

Document Reference No.: FT_000079
USB TO RS232 UART SERIAL CONVERTER PCB Datasheet Version 1.41
Clearance No.: FTDI# 52
2.2 Features
USB-RS232-PCB provides a USB to RS232
Serial UART interface.
Entire USB protocol handled by the electronics
on the PCB.
EIA/TIA-232 and V.28/V.24 communication
interface with low power requirements.
UART interface support for 7 or 8 data bits, 1
or 2 stop bits and odd / even / mark / space /
no parity.
Fully assisted hardware (RTS#/CTS#) or X-On
/ X-Off software handshaking.
Data transfer rates up to 1 Mbaud.
Internal EEPROM with user writeable area.
FTDI’s royalty-free VCP allow for
communication as a standard emulated COM
port and D2XX ‘direct’ drivers provide DLL
application programming interface.
Support for FT232R FTDIChip-ID™ feature for
improved security.
PCB is USB Powered - no external supply
required.
6 outputs provide Tx, Rx, RTS#, CTS#, POWER
and GND.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to +85°C operating temperature range.
ESD Protection for RS-232 I/O's
±15kV Human Body Model (HBM)
±15kV EN61000-4-2 Air Gap Discharge
±8kV EN61000-4-2 Contact Discharge
Copyright © 2011 Future Technology Devices International Limited
5