ML22825-XXX Datasheet, PDF (51/63 Pages) List of Unclassifed Manufacturers – Speech Synthesis LSI with Built-in P2ROM Including 2-Channel Mixing Function

FEDL228XX-05
ML2282X-XXX/ ML2286X -XXX
11. CLOOP command
x command
1
0
0
1
0
0 CH1 CH0
The CLOOP command is used to release the repeat playback mode for each channel. This command can be set
to each channel and also to multiple channels simultaneously. The channels are specified by setting CH0 to
CH1 bits to “1” state respectively.
When the repeat playback mode is released, the NCR signal goes “H” level.
It is possible to input this command regardless of the NCR signal status during playback, but a prescribed
command interval time (:t_INT) is needed.
- Channel setting method
CH 0
CH 1
Channel
Channel 1
Channel 2
51/63