EFM32GG940 Datasheet, PDF (50/68 Pages) List of Unclassifed Manufacturers – EFM32GG940 DATASHEET

Alternate
Functionality
0
CMU_CLK0
PA2
CMU_CLK1
PA1
DAC0_N0 /
OPAMP_N0
PC5
DAC0_N1 /
OPAMP_N1
PD7
DAC0_N2 /
OPAMP_N2
PD3
DAC0_OUT0 /
OPAMP_OUT0
PB11
DAC0_OUT0ALT /
OPAMP_OUT0ALT
DAC0_OUT1 /
OPAMP_OUT1
PB12
DAC0_OUT1ALT /
OPAMP_OUT1ALT
DAC0_OUT2 /
OPAMP_OUT2
PD5
DAC0_P0 /
OPAMP_P0
PC4
DAC0_P1 /
OPAMP_P1
PD6
DAC0_P2 /
OPAMP_P2
PD4
DBG_SWCLK
PF0
DBG_SWDIO
PF1
DBG_SWO
PF2
ETM_TCLK
ETM_TD0
ETM_TD1
ETM_TD2
ETM_TD3
GPIO_EM4WU0
GPIO_EM4WU1
GPIO_EM4WU3
GPIO_EM4WU4
GPIO_EM4WU5
HFXTAL_N
HFXTAL_P
I2C0_SCL
I2C0_SDA
I2C1_SCL
PD7
PD6
PD3
PD4
PD5
PA0
PA6
PF1
PF2
PE13
PB14
PB13
PA1
PA0
PC5
Preliminary
...the world's most energy friendly microcontrollers
LOCATION
1
2
3
4
5
6
Description
PD7
Clock Management Unit, clock output number 0.
PD8 PE12
Clock Management Unit, clock output number 1.
Operational Amplifier 0 external negative input.
Operational Amplifier 1 external negative input.
Operational Amplifier 2 external negative input.
Digital to Analog Converter DAC0_OUT0 /
OPAMP output channel number 0.
PD0
Digital to Analog Converter DAC0_OUT0ALT /
OPAMP alternative output for channel 0.
Digital to Analog Converter DAC0_OUT1 /
OPAMP output channel number 1.
PD1
Digital to Analog Converter DAC0_OUT1ALT /
OPAMP alternative output for channel 1.
PD0
Digital to Analog Converter DAC0_OUT2 /
OPAMP output channel number 2.
Operational Amplifier 0 external positive input.
Operational Amplifier 1 external positive input.
PF0 PF0 PF0
PF1 PF1 PF1
PD1 PD2
PC6 PA6
PC7 PA2
PD3 PA3
PD4 PA4
PD5 PA5
PD7 PC7
PD6 PC6
PB12
Operational Amplifier 2 external positive input.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and
has a built-in pull down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and
has a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must
be enabled by software to be used.
Embedded Trace Module ETM clock .
Embedded Trace Module ETM data 0.
Embedded Trace Module ETM data 1.
Embedded Trace Module ETM data 2.
Embedded Trace Module ETM data 3.
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
High Frequency Crystal (4 - 48 MHz) negative pin. Also
used as external optional clock input pin.
High Frequency Crystal (4 - 48 MHz) positive pin.
PF1 PE13 I2C0 Serial Clock Line input / output.
PF0 PE12 I2C0 Serial Data input / output.
I2C1 Serial Clock Line input / output.
2012-09-11 - EFM32GG940FXX - d0044_Rev1.00
50
www.energymicro.com