U4301 Datasheet, PDF (5/6 Pages) List of Unclassifed Manufacturers – Prevent dust, sand and water from getting into switches

Sealing boots
For pushbutton switches
For bushing Ø 11,9-32 NS (15/32-32UNS) - 13000X778, 13000X768 and 8000-6X934 series
HEX NUT
Nickel plated
Black
Black
N35211005
(U589)
N35211002
(U590)
PUSHBUTTON SILICONE BOOTS
Red
Green
N35212005 N3521V005
(U589-6)
(U589-3)
N35212002 N3521V002
(U590-6)
(U590-3)
White
N3521B005
(U589-7)
-
17 (.669)
AC.FLATS
For long plunger (-9) care should be taken over the panel thickness.
For bushing Ø 12 x 0.75 SI (.472x.075 IS) - 1200, 4700 and 4800 series
HEX NUT
Nickel plated
Black
Black
N36211005
(U1654)
N36211002
(U1656)
PUSHBUTTON SILICONE BOOTS
Red
Green
N36212005 N3621V005
(U1654-6) (U1654-3)
N36212002 N3621V002
(U1656-6) (U1656-3)
White
N3621B005
(U1654-7)
-
Nickel plated
PUSHBUTTON BLACK NEOPRENE BOOTS
N36216005 (U31)
Black
N36216002 (U225)
Chrome plated
N36216001 (U224)
17 (.669)
AC.FLATS
For double sealing on IC, IH, IL, IM, IP and IB-IS series
Transparent
Blue
Black
Red
SILICONE BOOT
U5125
U5125-1
U5125-2
U5125-6
Operating temperature : -40°C to +85°C
The flat seal or O-Ring supplied with the switch should not be used with this boot.
For double sealing on IA series
Black
Yellow
Red
H
SILICONE BOOT
U6602
U6605
U6606
For IZ series
HEX NUT
Nickel plated
Black
TRANSPARENT SILICONE BOOT
N3822D005
N3822D002
Panel thickness :
For models IZP and IZN, panel thickness should be 4 mm (.157).
No restriction for IZM models.
Ø19.00
(.748 DIA)
Ø16.00
(.629 DIA)
Ø21.00
(.826 DIA)
21 (.826)
AC.FLATS
H-6
www.apem.com
APEM