TX-F02 Datasheet, PDF (5/5 Pages) List of Unclassifed Manufacturers – Wireless Remote Controller/Transmitter

CE Caution Note (European Union)
Symbol of it accords with EMC regulation (89/336 / EEC) to represent this device,
and the low-voltage regulation of European Union (73/23/EEC). It represents to follow
the following standard regulations of European Union (The bracket is a reciprocal
international standard reciprocal international standard and regulation).
 EN 60950/A11: 1997/(IEC 60950/A4: 1996),The ones that includes information
science and technology of apparatus of e-commerce safe.
 EN 55024: 1998 (IEC 1000-4-2, 1000-4-3, 1000-4-4, 1000-4-5, 1000-4-6,
1000-4-8, 1000-4-11) -' scientific and technological apparatus of information - The
characteristic of interfere avoided - Restrain and test method '
 Chapter 2 -Static release (ESD) Demand
 Chapter 3 -Radiate the static field demand
 Chapter 4 -The electron is transmitted / produced and washed (EFT) fast
Demand.
 Chapter 5 -surge demand
 Chapter 6 -Resistance demand caused in field of wireless frequency.
 Chapter 8 -Magnetic field demand of electric frequency.
 Chapter 11 –Shortly cut off the demand of making a variation with the voltage
transiently under the voltage.
EN 55022:1998/(CISPR 22:1997) ,Class B, ' “To assess information scientific and
technological apparatus wireless restriction and way of interfering with the
characteristic.”
FCC Consistent Declaration ( U.S.A. Only)
Attention: FCC rule regulation, modified and changed must allowed by WENSHING
Electronics company, otherwise that would make you operate this apparatus invalid.
This apparatus adopted test, according to chapter 15 that FCC regulation, accord with
Class B digital restrictions of device. These limits are designed to provide reasonable
protection, avoid to having harmful interference at home’s environment.
This device may have radiated wireless frequency energy. If don’t allow the instruction
manual, then may will interfere wireless communication. However, there is no any way
to guarantee, it will not be interfered in particular installed. If this device really causes
harmful interference, (It could be confirmed by turning on or off this device.) Advise
you to try to use the following ways modifying the interference situation.
 Relocation receiving antenna or altering its direction.
 Increase the distance between device and receiver.
 Please connect this device to the outlet in the circuit different from the receiver.
 The following manuals is published by Federal Communications Commission,
they must be helpful to all users.
 How to Identify and Resolve Radio-TV Interference Problems. (This manual can
be obtained by relevant departments of publication of the U.S. government.)
 Government Printing Office, Washington D.C., 20402. Stock No. 004-00398-5
http://www.wenshing.com.tw ; http://www.rf.net.tw
TX-F02 Instruction Manual P.5