RB1-125BAG1A Datasheet, PDF (5/11 Pages) List of Unclassifed Manufacturers – MECHANICAL DIMENSION

Spec No. : RB1111-00
RB1-125BAG1A
2. REQUIREMENTS
2.1 Design and Construction
Product shall be of design, construction and physical dimensions specified
on applicable.
2.2 Material
2.2.1 Terminal Parts (Underplating : 30μ" min. Nickel overall)
2.2.1.1 RJ Terminal : PH. Bronze, Thickness=0.30mm
Finish : Contact Area :Gold Flash
2.2.1.2 Input Terminal : Brass, Thickness=0.35mm
Finish : 100μ" min. Tin
2.2.1.3 Case Terminal : Brass, Thickness=0.30mm
Finish : 100μ" min. Tin
2.2.2 Plastic Parts <UL94V-0>
2.2.2.1 Housing : High Temperature Thermoplastic, Black
2.2.2.2 Case : High Temperature Thermoplastic, Black
2.2.3 Shield Parts : Stainless, Thickness=0.20mm, Pre-soldering
-4-
www.ude-corp.com