R4B-800G1V2 Datasheet, PDF (5/13 Pages) List of Unclassifed Manufacturers – 800W+800W Mini Redundant Power Supply

4. Output Characteristic
4.1. Output Voltage & Current Regulation
Output Voltage Min. Current Rated Current
Regulation
+3.3V
1A
32A
±5％
+5V
1A
32A
±5％
+12V
1A
65A
±5％
-12V
0A
0.8A
±5％
+5VSB
0.5A
3.5A
±5％
Note：The combined total power from +5V & +3.3V shall not exceed 190W.
4.2. DC Output Ripple & Noise
Output Voltage Ripple & Noise (Max.)
+3.3V
60mVp-p
+5V
60mVp-p
+12V
120mVp-p
-12V
120mVp-p
+5VSB
50mVp-p
Note：1. Ripple & Noise bandwidth is set to 20MHz.
2. Use a 0.1uF ceramic capacitor in parallel with a 10uF electrolytic capacitor
at output connector terminals for ripple & noise measurement.
4.3. Hold Up Time
Output Voltage 115Vac Input
230Vac Input
+3.3V
＞16ms
+5V
＞16ms
+12V
＞16ms
-12V
＞16ms
+5VSB
＞16ms
Note：All output shall be with full load.
＞16ms
＞16ms
＞16ms
＞16ms
＞16ms
SPEC=R4B800G1V2-vA8.doc PAGE 第 5/13 頁