QBED8220A Datasheet, PDF (5/7 Pages) List of Unclassifed Manufacturers – 5mm IR emitter

QBED8220A
5mm IR emitter
4. Do not dip the epoxy encapsulation part of LED into any soldering
paste liquid.
5. After soldering, do not adjust the location of the LED anymore.
When attaching electronic parts to a PCB with LEDs, the curing time for the whole
PCB should be less than 60 seconds, at less than a temperature of 120
Product: QBED8220A
Date: 06/25/2011
Version# 1.0
Page 5 of 7