HBLDS6SSAC Datasheet, PDF (5/12 Pages) List of Unclassifed Manufacturers – Manual Motor Controllers and Disconnects

MotorQuick^® and Variable Frequency Drive (VFD) Switches
Plug and Play Technology
MotorQuick^® combines the plug-and-play technology of Hubbell’s
LINKOSITY^® power system with the versatility of Circuit-Lock^® motor
disconnect switches to drastically reduce the time it takes to replace
motors. These quick disconnect switches feature lockable handles to
meet OSHA lockout/tagout regulations and include pre-wired LINKOSITY
receptacles to meet a variety of application needs. The quick disconnect
LINKOSITY terminations, combined with the ability to conveniently
pre-wire spare motors with a LINKOSITY inlet without shutting down
the entire line, reduces motor change-out time by more than 65%.
The result is equipment up and running in a fraction of the time
providing productivity and bottom-line savings.
• Plug and play design allows for faster installation
• Reduces motor change-out time by more than 65%
• Crush and impact resistant MC cables
Quick Disconnect Switches
30A 3 Pole 600V AC
Type 1 Non-Metallic Enclosure
HBL1389D with one pre-wired LINKOSITY^® female receptacle (load side).
HBL1389D with 5 foot pre-wired LINKOSITY^® female cable (load side).
HBL1389D with one pre-wired LINKOSITY^® male receptacle (line side) and
one pre-wired LINKOSITY^® female receptacle (load side).
Catalog Number
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
Type 4X Non-Metallic Enclosure
HBLDS3 with one pre-wired LINKOSITY^® female receptacle (load side).
HBLDS3 with 5 foot pre-wired LINKOSITY^® female cable (load side).
HBLDS3 with one pre-wired LINKOSITY^® male receptacle (line side)
and one pre-wired LINKOSITY^® female receptacle (load side).
Note: See page 6 for stainless steel option.
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
Accessories
Description
Catalog Number
3P 4W LINKOSITY^® male receptacle for installation on motor.
RM3004PA001
3P 4W LINKOSITY^® double ended (male/female) 5-50 foot cable.
PH3004PAxxx*
Lock-on cover for LINKOSITY^® connections.
PH2030C
Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the xxx with the required
length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA015 = 15 foot cable.)
HBL1389MQR2
HBLDS3MQR
HBL1389MQ5
HBLDS3MQ5
Hubbell's Disconnect Switch for Variable Frequency Drives
(VFDs) prevents downtime from out-of-sequence equipment
shutdowns when using VFDs, the most common method
of controlling conveyor system motors. The HBLDS3VFD
integrates an early-break auxiliary contact installed in the
HBLDS3 30 Amp disconnect switch enclosure. The contact
interfaces directly with VFDs to execute a coast-to-stop,
preventing damage to the disconnect switch and high-
performance VFD output devices.
• Thoroughly tested for effective use with VFDs
• Powers down the drive prior to opening the motor disconnect
• Prevents damage to the disconnect switch and the VFD
Unfused Disconnect Switches
30A 3 Pole 600V AC
Description
Non-Metallic enclosure, Circuit-Lock disconnect switch for use with
variable frequency drives.
Stainless Steel enclosure, Circuit-Lock disconnect switch for use with
variable frequency drives.
Catalog Number
HBLDS3VFD
HBLDS3SSVFD
www.hubbell-wiring.com
For complete listing of Hubbell Products see our full line catalog.
HBLDS3VFD
HBLDS3SSVFD
5