4053B Datasheet, PDF (5/5 Pages) List of Unclassifed Manufacturers – 14-bit, 150 MSa/s, 16k point arbitrary waveform generator

Dual Channel Function/Arbitrary Waveform Generators
4050B Series
Model
4053B, 4054B & 4055B
Pulse
Pulse Width
32.6 ns minimum, 100 ps resolution, 1,000,000 s max.
Rise/Fall Time
16.8 ns ( 1 Vpp, 50 10% – 90% 50 Ω load)
Duty Cycle
0.001% resolution
Overshoot
< 3 % (100 kHz, 1 Vpp)
Jitter (rms) cycle to cycle
300 ps + 0.05 ppm of period (typical, 1 kHz, 1 Vpp)
Burst
Waveform
ine, square, ramp, pulse, arbitrary, noise
Type
cycle (1-1000000 cycles), infinite, gated
Start/Stop Phase
0 ° – 360 °
Internal Period
1 µs – 1000 s
Gated Source
Internal, external trigger
Trigger Source
internal, external, manual
Phase Offset
Range
0 ° – 360 °
Resolution
0.1 °
AM, FM & PM Modulation Characteristics
Carrier
sine, square, ramp, arbitrary (except DC)
Source
internal, external
Internal Modulation Waveform
sine, square, ramp, noise, arbitrary (1 mHz - 20 kHz)
AM Modulation Depth
0% – 120%, 0.1% resolution
FM Frequency Deviation
0 – 0.5*bandwidth, 10 µHz resolution
PM Phase Deviation
0 – 360 °, 0.1 ° resolution
ASK & FSK Modulation Characteristics
Carrier
sine, square, ramp, arbitrary (except DC)
Source
internal, external
Modulation Waveform
50% duty cycle square waveform (1 mHz – 50 kHz)
PWM Modulation Characteristics
Source
internal, external
Modulation Waveform
sine, square, ramp, arbitrary (except DC)
Internal Modulation Frequency
1 mHz – 20 kHz
DSB-AM Modulation Characteristics
Carrier
sine, square, ramp, arbitrary (except DC)
Source
internal, external
Modulation Waveform
sine, square, ramp, noise, arbitrary (1 mHz – 20 kHz)
Sweep Characteristics
Waveforms
sine, square, ramp, arbitrary (except DC)
Sweep Shape
linear or logarithmic, up or down
Sweep Time
1 ms – 500 s
Sweep Trigger
internal, external, manual
5
v010317
Auxiliary Input / Output
Modulation Input
Sync and Trigger Out
Trigger In
Reference Clock
Input
Output
Frequency Counter
Measurement
Measurement Range
Input Range
Input Impedance
Coupling
Environmental and Safety
Temperature
Humidity
Altitude
Electromagnetic Compatibility
Safety
General
Display
Interfaces
Storage Memory
Power
Power Consumption
Dimensions (W x H x D)
Weight
Standard Accessories
Optional Accessories
±6 Vpp (typical) for 100% modulation
Maximum input voltage: 7 V
Input impedance: 10 kΩ
TTL compatible *1)
Output impedance 100 Ω
Maximum frequency: 1 MHz
Minimum pulse width: 500 ns
TTL compatible *2)
Input impedance: 10 kΩ
Minimum pulse width: 100 ns
Response time 100 ns (max) in sweep mode and
600 ns (max) in burst mode
Frequency Range: 10 MHz ± 1 kHz (typical)
Min. Voltage Input: 1.4 V
5 kΩ input impedance
Frequency Range: 10 MHz ± 25 ppm (typical)
Voltage Level: 3.3 V (typical), 2 V (minimum)
50 Ω output impedance
frequency, period, duty cycle,
positive/negative pulse width
100 mHz – 200 MHz (DC coupling)
10 Hz – 200 MHz (AC coupling)
100 mV to ± 2.5 V (< 100 MHz, DC coupling)
200 mV to ± 2.5 V (100 MHz – 200 MHz, DC coupling)
100 mV to 5 V (< 100 MHz, AC coupling)
200 mV to 5 V ( 100 MHz – 200 MHz, AC coupling)
1 MΩ
AC, DC, HF, REJ
operating: 32 ºF – 104 ºF (0 °C – 40 °C)
storage: -4 ºF – 140 ºF (-20 °C – 60 °C)
< 86º F (30 °C), ≤ 90 % RH
104 ºF (40 °C), ≤ 50 % RH
operating: below 9,842 ft (3,000 m)
storage: below 49,212 ft (15,000 m)
EMC Directive 2004/108/EC, EN61326:2006,
EN61000-3-2:2006+A2:2009, EN61000-3-3:2008
Low voltage directive 2006/95/EC, EN61010-1:2001,
EN61010-031:2002+A1:2008
4.3” TFT-LCD display, 480 x 272
LAN & USBTMC (standard), GPIB (optional), USB host
port
Arbitrary waveforms and instrument settings share the
same non-volatile storage memory of 100 MB.
100 – 240 VAC ± 10%, 50 / 60 Hz
100 – 120 VAC ± 10%, 400 Hz
50 W max.
263 x 96 x 295 mm (10.3” x 3.78” x 11.6”)
3.32 kg (7.32 lbs)
Three-Year Warranty
Getting started manual, instruction manual
(downloadable), AC power cord, USB type A-to-type B
cable, certificate of calibration
USB-to-GPIB adapter (model AK40G)
1*) V_OH = 3.8 V (I_OH = -8 mA), V_OL = 0.44 V (I_OL = 8 mA)
2*) V_IH= 2 V (min) / 5.5 V (max), V_IL= -0.5V (min) / 0.8 V (max)
www.bkprecision.com