RC0603JR-0712RL Datasheet, PDF (4/9 Pages) List of Unclassifed Manufacturers – This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process.

Chip Resistor Surface Mount ^{RC SERIES 0603 (RoHS Compliant)}
Product specification 4
9
MARKING
RC0603
03
YNSC001
Fig. 1 Value = 10 KΩ
E-24 series: 3 digits
First two digits for significant figure and 3rd digit
for number of zeros
Fig. 2 Value = 12.4 KΩ
563
ynsc003
Fig. 3 E-24 1% Value = 56 KΩ
E-96 series: 3 digits for 0603 ±1% EIA-96 marking
method
For 0603 ±1% E-24 series, one short bar under
marking letter
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added. See fig.4
DIMENSIONS
Table 1
TYPE
L (mm)
W (mm)
H (mm)
I₁ (mm)
I₂ (mm)
RC0603
1.60 ±0.10
0.80 ±0.10
0.45 ±0.10
0.25 ±0.15
0.25 ±0.15
OUTLINES
For dimension see Table 1
H
I2
I₁
W
L
Fig. 4 Chip resistor outlines
marking layer
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
ceramic substrate
overcoat
YNSC065
Apr 24, 2009 V.4
www.yageo.com