PB16HC Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – G4 16-Channel Rack With Header Connector Common TB

DATA SHEET
Form 390-010206
Connections ^(CONT.)
Notes:
1. Even pins on control connector are connected by
etch to common.
2. +VCC and return connected to terminals marked
+5V and GND.
3. At each module position on the field terminal
strip, the lower number is always connected to
pin 1 of the I/O module.
4. Use only 5 VDC logic modules when using the
mounting rack with a brain board.
Module
Position
Control
(Header
Connector)
0
47
1
45
2
43
3
41
4
39
5
37
6
35
7
33
8
31
9
29
10
27
11
25
12
23
13
21
14
19
15
17
Field
(Terminal
Strip)
1 and 2
3 and 4
5 and 6
7 and 8
9 and 10
11 and 12
13 and 14
15 and 16
17 and 18
19 and 20
21 and 22
23 and 24
25 and 26
27 and 28
29 and 30
31 and 32
RACKS
CLASSIC G4
16-CHANNEL
page 4/4
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • E-mail: [e-mail]
© 1990–2001 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.