PB01D2415B Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – 1W DC/DC CONVERTER, SIP-Package

Power Derating Curve
(3.3V, 5V & ±5V}
(all other output)
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Ripple & Noise measurement bandwidth is 0-20MHz.
3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however they may not meet all specifications listed.
4 All DC/DC converters should be externally fused at the front end for protection.
5 Specifications subject to change without notice.
Mechanical Drawing
Mechanical Dimensions
19.5 [0.77]
0.5
[0 .0 2 ]
2 .3 5
[0 .0 9 ]
2.54 5.08 2X2.54
[0.10] [0.20] [2X0.10]
18.5 [0.73]
Bottom View
12
4 56
0.50
[0.02]
Pin Connections
Pin Single Output
1
+Vin
2
-Vin
4
-Vout
5
No Pin
6
+Vout
Dual Output
+Vin
-Vin
-Vout
Common
+Vout
5V&12V Input:
T: 6.1mm(0.24 inch)
15V&24V Input:
T: 7.1mm(0.28 inch) for Models
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Physical Outline
Case Size (5V&12V Input) :
Case Size
:
(15V&24V Input)
Case Material
:
Weight (5V&12V Input)
:
Weight (15V&24V Input) :
19.5x6.1x10.2mm (0.77x0.24x0.40 Inches)
19.5x7.1x10.2mm (0.77x0.28x0.40 Inches)
Non-Conductive Black Plastic
(flammability to UL 94V-0 rated)
2.2g
2.6g
DS_PB01S/D_08232012
E-mail: [e-mail]
http://www.delta.com.tw/dcdc
P4