OCM14102-UX-OCP Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – Accelerates applications and storage performance

OCm14000-OCP 10GbE
Converged Network Adapter
Interconnect
· Copper
- SFP+ Direct Attached Twin-Ax Copper interface
- Standards compliant passive copper cables up
to 5m and active copper cables up to 10m
· Optical
- Optic 10GBASE-SR short wave lasers with LC
type connector supported up to 300m on laser-
optimized OM3 multimode fiber (MMF) cables
Physical dimensions
· OCP mezz card form factor card
· 68mm x110mm (2.68 in x 4.3 in)
· Bracket not provided
Environmental requirements
· Operating temperature: 0° to 45°C (32° to 113°F)
· Storage temperature: -40° to 70°C (-40° to 158°F)
· Relative humidity: 5% to 95% non-condensing
Agency and product safety approvals
North America
· FCC/Industry Canada Class A
· UL/CSA Recognized
· Class 1 Laser Product per DHHS 21CFR (J)
Europe
· CE Mark
· EU RoHS compliant
· TUV Bauart Certified
· Class 1 Laser Product per EN60825-1
Australia
· C-Tick or RCM Mark
Japan
· VCCI Class A
Taiwan
· BSMI Class A
Korea
· MSIP (formally KCC/MIC) Class A
China
· China RoHS Compliant
SPECIFICATIONS
CONNECT - DATA SHEET
Ordering information
Adapters¹
OCm14102-UX-OCP
· Dual-port, 10GBASE-CR (direct attach copper)
SFP+, CNA OCP Adapter
Optional accessories²
OC10-SR-OPT-1
· 10GBASE-SR (short reach optical)
SFP+ Optical Kit, 1 pc
OC10-SR-OPT-2
· 10GBASE-SR (short reach optical)
SFP+ Optical Kit, 2 pcs
1 _{For optical adapter support, a customer must}
order an Emulex accessory transceiver kit
2 _{Only Emulex accessories are warranted and fully}
supported by Technical Support
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 [phone]
Bangalore, India [phone] | Beijing, China [phone]
Dublin, Ireland [phone] | Munich, Germany [phone]
Paris, France [phone] | Tokyo, Japan [phone] | Singapore [phone]
Wokingham, United Kingdom [phone] | Brazil [phone]
www.emulex.com
©2015 Emulex, Inc. All rights reserved.
This document refers to various companies and products by their trade names. In most cases, their respective companies claim these designations as trademarks or registered trademarks. This information is provided for reference only. Although this information is
believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This document is the property of Emulex and may not be duplicated
without permission from the Company.
ELX15-2462 · 4/15