OCM14102-U2-D Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – PCIe 3.0 compliant

SPECIFICATIONS
OCm14102-U2-D Dual-port 10GbE
Converged Network Daughter Card
Hardware Environments
· Dell 12G PowerEdge Blade Servers
Interconnect
· Copper
- SFP+ Direct Attached Twin-Ax Copper interface
- Standards compliant passive and active copper
cables supported up to 5m
· Optical
- 10GBASE-SR short wave optic transceivers
(ordered separately)
Environmental Requirements
· Operating temperature: 0° to 55°C (32° to 131°F)
· Storage temperature: -40° to 70°C (-40° to 158°F)
· Relative humidity: 5% to 95% non-condensing
Agency Approvals
North America
· FCC Class A
· UL/CSA Recognized
· Class 1 Laser Product per DHHS 21CFR (J)
Australia / New Zealand
· C-Tick Mark
Europe
· CE Mark
· EU RoHS compliant
· TUV Bauart Certified
· Class 1 Laser Product per EN60825-1
Japan
· VCCI Class A
Taiwan
· BSMI Class A
Korea
· MSIP (formally KCC/MIC) Class A
China
· China RoHS Compliant
Ordering Information
JJPC0
· Emulex OCm14102-U2-D Dual-port 10Gb SFP+
Converged Network Daughter Card
Third-party information brought to you courtesy of Dell.
twitter.com/elx4dell
friendfeed.com/emulex
bit.ly/emulexfb
bit.ly/emulexlinks
bit.ly/elxdellblog
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 [phone]
www.emulex.com/dell
Bangalore, India [phone] | Beijing, China [phone]
blogs.emulex.com/blogs/dell
Dublin, Ireland [phone] | Munich, Germany [phone]
Paris, France [phone] | Tokyo, Japan [phone] | Singapore [phone]
Wokingham, United Kingdom [phone] | Brazil [phone]
©2014 Emulex, Inc. All rights reserved. This document refers to various companies and products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered trademarks. This information is provided for reference only. Although this information
is believed to be accurate and reliable at the time of publication, Emulex assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice. This report is the property of Emulex and may not be duplicated without permission from the Company.
The information contained in this document, including all instructions, cautions, and regulatory approvals and certifications, is provided by Emulex and has not been independently verified or tested by Dell. Dell cannot be responsible for damage caused as a result of either following or failing to follow these
instructions. All statements or claims regarding the properties, capabilities, speeds or qualifications of the part referenced in this document are made by Emulex and not by Dell. Dell specifically disclaims knowledge of the accuracy, completeness or substantiation for any such statements. All questions or
comments relating to such statements or claims should be directed to Emulex. Visit www.dell.com for more information.
ELX14-0514 · 5/14