4063 Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – 14-bit, 500 MSa/s, 512k point (Ch2 only) arbitrary waveform generator

Dual Channel Function/Arbitrary Waveform Generators
4060 Series
Specifications
Model
Channels
Frequency Characteristics
Sine
Square
Triangle, Ramp
Pulse
Gaussian Noise (-3 dB)
Arbitrary
Accuracy
Resolution
Arbitrary Characteristics
Built-in Waveforms
Waveform Length
Vertical Resolution
Sampling Rate
Minimum Rise/Fall Time
Jitter (pk-pk)
Non-volatile Memory Storage
Output Characteristics
Amplitude Range (into 50 Ω)
Amplitude Resolution
Amplitude Accuracy (100 kHz)
Amplitude Flatness
(relative to 100 kHz Sine, 1 Vpp)
Cross Talk
Offset Range (DC)
Offset Resolution
Offset Accuracy
Output Impedance
Output Protection
Waveform Characteristics
Harmonic Distortion (Sine)
Total Harmonic Distortion (Sine)
Spurious (non-harmonic)
Phase Noise
Rise/Fall Time (Square)
Variable Duty Cycle (Square)
Asymmetry (50% duty cycle)
Jitter (Square)
Ramp Symmetry
Linearity (Triangle, Ramp at 1 kHz,
1 Vpp, 100% Symmetry)
4063
4064
2
4065
1 µHz – 80 MHz
1 µHz – 40 MHz
1 µHz – 20 MHz
1 µHz – 20 MHz
1 µHz – 120 MHz
1 µHz – 160 MHz
1 µHz – 50 MHz
1 µHz – 4 MHz
1 µHz – 30 MHz
1 µHz – 40 MHz
100 MHz
1 µHz – 30 MHz
1 µHz – 40 MHz
± 2 ppm (1 year)
1 µHz
36
Ch1: 16,000 points, Ch2: 512,000 or 16,000 points
14 bits
500 MSa/s
6 ns (typical)
2 ns (typical)
8 x 512 kpts waveforms and 24 x16 kpts waveforms
1 mVpp – 10 Vpp, ≤ 40 MHz
1 mVpp – 5 Vpp, ≤ 100 MHz
1 mVpp – 1.5 Vpp, ≤ 160 MHz
up to 4 digits
± (0.3 dBm + 1 mVpp)
≤ 10 MHz ± 0.2 dB
≤ 80 MHz ± 0.5 dB
≤ 160 MHz ± 0.8 dB
< -65 dBc
± 5 V into 50 Ω
± 10 V into open circuit
up to 4 digits
± ( |offset setting value| x 1% + 1 mV)
50 Ω, high impedance
short-circuit protection
DC – 1 MHz, < -54 dBc
1 MHz – 10 MHz, < -46 dBc
10 MHz – 100 MHz, < - 35 dBc
100 MHz – 160 MHz, < -26 dBc
DC – 20 kHz at 1 Vpp, < 0.2 %
DC – 1 MHz, < -70 dBc
1 MHz – 10 MHz, < -65 dBc
100 kHz offset, - 116 dBc/Hz (typical)
< 8 ns (10 % - 90 %) at full amplitude into 50 Ω
20% - 80% to 10 MHz
40% - 60% to 40 MHz
50% > 50 MHz
1% of period + 5 ns (typical,1 kHz, 1 Vpp)
100 ps rms (typical)
0% - 100%
< 0.1% of peak output (typical)
4
www.bkprecision.com