CU24063-Y100 Datasheet, PDF (35/42 Pages) List of Unclassifed Manufacturers – Vacuum Fluorescent Display Module Specification

CU24063-Y100
13.3.45 Serial OUT mode end
Code:
1Fh 28h 65h 84h d1 d2 d3
Definable area: d1 = 4Fh （Character "O"）
d2 = 55h （Character "U"）
d3 = 54h （Character "T"）
Function: Switch Serial OUT to SBUSY and start “Direct Command mode”.
This command is only valid in Serial OUT mode.
After “Serial OUT mode end” command is executed, SBUSY=0 (READY) until receipt of
next data.
Wait at least 5ms after sending 54h ("T") before sending next data.
13.3.46 Select / Deselect 5×8 Matrix font
Code:
1Fh 28h 67h 04h d
d:
Select / Deselect 5×8 Matrix font
Definable area: 128 (80h) ≦ d ≦ 129 (81h)
d = 80h：Deselect 5×8 Matrix font
d = 81h：Select 5×8 Matrix font
Default: d = 81h (Select 5×8 Matrix font)
Function: Select / Deselect 5×8 Matrix font
Selecting 5×8 Matrix font gives decender to only these five characters: ‘g’ (67h),
‘j’ (6Ah), ‘p’ (70h), ‘q’ (71h) and ‘y’ (79h).
Both 5×8 font and 5×7 font give the same style fonts to the other characters.
d=81h: The five characters are displayed in 5×8 font after this command.
Characters already displayed are not affected.
For details of each pattern, refer to font spec. DS-1519-0002-xx.
5×8 Font
5×7 Font
5×8 Font
5×7 Font
- 34 -