S18SP6LP Datasheet, PDF (33/42 Pages) List of Unclassifed Manufacturers – Universal photoelectric family offers 18 mm threaded lens or side mounts

S18/M18 Series
Compact Sensors
S18, 20-250V ac (cont’d)
Models
S18AW3D
S18AW3DQ1
S18RW3D
S18RW3DQ1
S18AW3DL
S18AW3DLQ1
S18RW3DL
S18RW3DLQ1
Sensing
Mode/LED*
Range
100 mm
DIFFUSE
300 mm
Cable**
2m
4-Pin Micro QD
2m
4-Pin Micro QD
2m
4-Pin Micro QD
2m
4-Pin Micro QD
Output
Type
LO
DO
LO
DO
Excess Beam
Gain Pattern
EGCD-25
(p. 435)
BPD-24
(p. 457)
EGCD-26
(p. 435)
BPD-25
(p. 457)
*
Infrared LED
** For 9 m cable, add suffix W/30 to the 2 m model number (example, S18AW3D W/30). A model with a QD requires a mating cable (see page 386).
Download
PDF
Data
Sheet
116160
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Vibration and
Mechanical Shock
Certifications
Hookup Diagrams
S18 AC Specifications
20 to 250V ac (50/60 Hz). Average current 20 mA. Peak current: 200 mA at 20V ac, 500 mA at 120V ac, 750 mA at
250V ac
Protected against transient voltages
SPST solid-state ac switch; three-wire hookup; Light Operate (LO) or Dark Operate (DO), depending on model.
Light operate: Output conducts when the sensor sees its own (or the emitter’s) modulated light
Dark operate: Output conducts when sensor sees dark
300 mA max. (continuous) Fixed-field models: derate 5 mA/° C above +50° C;
Inrush capability: 1 amp for 20 milliseconds, non-repetitive
Off-state leakage current: less than 100 mA
On-state voltage drop: 3V at 300 mA ac; 2V at 15 mA ac
Protected against false pulse on power-up
Opposed Mode: 16 milliseconds ON, 8 milliseconds OFF; Polarized Retroreflective, Non-polarized
Retroreflective, Fixed-field, and Diffuse: 16 milliseconds ON/OFF
NOTE: 100 millisecond delay on power-up
Opposed Mode: 2 milliseconds; Polarized Retroreflective, Non-polarized Retroreflective, Fixed-field, and
Diffuse: 4 milliseconds. Repeatability and response are independent of signal strength.
Two LEDs: Green and Yellow
Green ON steady: power to sensor is ON
Yellow ON steady: sensor sees light
Yellow flashing: excess gain marginal (1-1.5x) in light condition
Housings are thermoplastic polyester. Lenses are polycarbonate or acrylic; two jam nuts included.
S18 models: Leakproof design rated NEMA 6P, DIN 40050 (IP69K)
M18 models: Rated NEMA 6P (IP67)
2 m or 9 m attached cable, or 4 pin Micro-style quick-disconnect fitting. QD cables are ordered separately. See
page 386.
Temperature: -40° to +70° C Relative humidity: 90% at 50° C (non-condensing)
All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max, double
amplitude 0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for
non-operation)
S18 & M18
models
S18 models
only
R
S18 models
only
Cabled Emitters: AC03 (p. 484)
QD Emitters: AC07 (p. 485)
Other Cabled Models: AC05 (p. 485)
Other QD Models: AC06 (p. 485)
More information online at bannerengineering.com 97