W567SXXX Datasheet, PDF (3/13 Pages) Winbond – 8-CHANNEL SPEECH+MELODY PROCESSOR (BandDirectorTM Series)

W567SXXX
2. FEATURES
 Wide range of operating voltage:
 8 MHz @ 3.6 volt ~ 5.5 volt
 4 MHz @ 2.4 volt ~ 5.5 volt
 Power management:
 4 ~ 8 MHz system clocks, with Ring type
 Stop mode for stopping all IC operations
 Provides up to 8 inputs and 24 I/O pins
 Current-type Digital-to-Analog Converter (DAC):
 (8+2)-bit resolution with programmable output current
 2 speaker outputs for stereo applications
 F/W speech synthesis with multiple format support: ADPCM/MDPCM/PCM
 Up to 8 speech synthesis¹ channels at programmable sample rate
 8 melody channels that can emulate characteristics of musical instruments
 8-input/10-bit-resolution Mixer can mix the speech and melody signals flexibly
 Dynamic control of the channel assignment to the dual speaker output for stereo effects
 Built-in IR carrier generation circuit for simplifying firmware IR application
 4-channel ADC interface (W567S301~S341) with maximum 4-KHz sampling rate and 6-bit
effective resolution
 Built-in 9 timers for speech/melody synthesis and general purpose applications
 Built-in 10*7 multiplier
 Built-in Watch-Dog Timer (WDT) and Low Voltage Reset (LVR)
 Built-in 32KHz crystal oscillator with divider for time-keeping application in W567S080 ~ S341
 Built-in Serial Interface Manager (SIM) in W567S080 ~ S341
 Support PowerScript for developing codes in easy way
 Full-fledged development system
 Source-level ICE debugger
 Event synchronization mechanism
 Compatible with W566B/C & W588S system
 User-friendly GUI environment
 Available package form: (COB is essential)
 W567S010, S015, S020, S025, S030: LQFP48
 W567S040, S060: QFP64
 W567S080 ~ S120: LQFP128
 W567S150 ~ S341: LQFP100
1 _{More speech channels are available for 8-bit PCM format in the remaining melody channels. When used as 2-ch MDPCM and}
6-ch PCM.
Publication Release Date: May 2010
-3-
Revision A18