|
TX48 Datasheet, PDF (3/14 Pages) List of Unclassifed Manufacturers – Two High-Speed USB 2.0 ports, True colour LCD controller | |||
|
◁ |
TX48
STARTER-KIT V
The Starter-Kit V is a ready-to-use development
system for building applications based on the TX
embedded processor boards.
⢠DIMM200 TX socket
⢠Two SD-card sockets
⢠USB 2.0 OTG and USB 2.0 Host connector
⢠D-SUB 15 VGA connector
⢠40pin LCD flat cable header
⢠3.5mm headphone connector
⢠JTAG interface
⢠SGTL5000 audio codec
⢠TSC2007 touchscreen controller
⢠RS232 on 10pin flat cable and SUB-D
header
⢠All pins of the TX socket are connected to
daughter board slot for easy application
design-in
⢠10/100 Mbit/s Ethernet
⢠5VDC Power Supply by USB-OTG or power
jack.
⢠100mm x 160mm
⢠Schematics of the base board are included
for reference.
DISPLAY OPTIONS
The optional display comes with an FFC cable and
a small adapter PCB which can be plugged directly
onto the Starter-Kit 40pin LCD header.
Option 1: 5,7â VGA Resistive Touch
⢠5,7 inch TFT display
⢠640 x 480 dots
⢠White LED backlight
⢠Resistive Touchsceen
Option 2: 5,7â VGA PolyTouchâ¢
⢠5,7 inch TFT display
⢠640 x 480 dots
⢠White LED backlight
⢠Capacitive Touchsceen
Ka-Ro electronics GmbH - Pascalstr. 22, D-52076 Aachen, Germany - Tel.: +49 2408 1402-0 (FAX -10)
www.karo-electronics.de
|
▷ |