TLED-40W Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – Switch Mode LED Driver

“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Yellow Wire
Minimum
0 mA
-2.0 V
Typical
—-
—-
Maximum
500 uA
+15 V
TLED40W Series
SSL Solutions Faster Than The Speed Of Light^®
Pg 3 of 3
“-D” Typical Dimming Circuit
Dim (+) Purple
TLED40W-xxx-Cxxxx-D IP710 Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
100
90
80
70
60
50
40
30
20
10
0
0V
Output Current / 0-10VDC Dimming Control Voltage
1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Purple-to-Gray Voltage (Vdc)
Notes:
1. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent.
2. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com