SUS1R52412C Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – Ordering information

SUS1R5
GENERAL SPECIFICATIONS
ISOLATION INPUT-OUTPUT
AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
VIBRATION
-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 98.0m/s² (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
490.3m/s² (50G), 11ms, once each along X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1
CASE SIZE/WEIGHT
OTHERS
COOLING METHOD
21.4X6.5X12.2mm (WXHXD) / 2g max
Convection/Forced air
*1 SUW1R5xx12/SUW1R5xx15 is available as single output, +24V/+30V.
*2 Rated input 5V, 12V, 24V or 48V DC Io=100%
*3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
* Parallel operation with other model is not possible.
External view
1. SMD(type B)
+Vin
-Vin
Pin terminal part details
1.8±0.3
2. DIP(type C)
+Vin
-Vin
3.68±0.25
6.5
Model
+Vout
TRM
-Vout
Recommended Pad and Hole dia.
(TOP VIEW)
type B
3.2
3.2
25.22
21.4
0.1min
type C
Adsorption area º6min
23.62 ±0.6
Coplanarity within 0.1
Model
+Vout
TRM
-Vout
5-º0.9
Unit : 0.1inch
Dimension : mm
SU.SUC
¶ Tolerance ±0.5
¶ Dimensions in mm
¶ Pin terminal thickness : 0.3±0.1
¶ Pin terminal material : Copper alloy
¶ Plating treatment of terminal : Lead free plating
¶ Mass 2g less
21.4
0.1min
20.32
G-5