SUS102412C Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – High reliability not built-in aluminum and tantalum electrolytic capacitor

SUS10
GENERAL SPECIFICATIONS
ISOLATION INPUT-OUTPUT
AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
VIBRATION
-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 98.0m/s² (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
490.3m/s² (50G), 11ms, once each along X, Y and Z axis
SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1
CASE SIZE/WEIGHT
OTHERS
COOLING METHOD
39.2X6.5X21.0mm (WXHXD) / 6g max
Convection/Forced air
*1 SUW10xx12/SUW10xx15 is available as single output, +24V/+30V.
*2 Rated input 5V, 12V, 24V or 48V DC Io=100%
*3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals.
*4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
* Parallel operation with other model is not possible.
External view
1.SMD(type B)
+Vin
RC
-Vin
Pin terminal part details
1.8 ±0.3
2.DIP(type C)
+Vin
3.68±0.25
RC
-Vin
6.5
Model
+Vout
Recommended Pad and Hole dia.
type B
(TOP VIEW)
TRM
3.2
3.2
43
-Vout
type C
0.1min
39.2
Adsorption area º8min
41.4 ±0.6
Model
39.2
Coplanarity within 0.1
6-º0.9
Unit : 0.1inch
Dimension : mm
SU.SUC
+Vout
TRM
-Vout
¶ Tolerance ±0.5
¶ Dimensions in mm
¶ Pin terminal thickness : 0.3±0.1
¶ Pin terminal material : Copper alloy
¶ Plating treatment of terminal : Lead free plating
¶ Mass 6g less
0.1min
38.1
G-11