SBF1 Datasheet, PDF(3/5 Page) List of Unclassifed Manufacturers – Compact modular self-contained photoelectric sensing controls

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SBF1 Datasheet, PDF (3/5 Pages) List of Unclassifed Manufacturers – Compact modular self-contained photoelectric sensing controls

◁

Selection of MULTI-BEAM Components

MULTI-BEAM sensors are made up of three components: scanner

block, power block, and logic module. This is true for all MULTI-

BEAMs with the exception of opposed mode emitter units which

require only a power block (no logic module).

The first decision in the component selection process is to determine

which family of MULTI-BEAM sensors is appropriate for the applica-

tion: 3- and 4-wire, or 2-wire.

Next, decide which scanner block (within the selected family) is best for

the application. The guidelines in the catalog introduction will help you

to determine the best sensing mode. Then narrow the choice by

comparing the specifications listed in the following charts and on the

pages referenced in the charts.

Finally, choose a power block and logic module to complete the

MULTI-BEAM assembly. Components snap together without inter-

wiring to form a complete photoelectric sensing system that meets your

exact requirements while maintaining the simplicity of a self-contained

sensor.

If you have any questions about selecting MULTI-BEAM components,

please contact your Banner sales engineer or call Banner's Applications

Department at (612) 544-3164 during normal business hours.

Upper Cover (lens)

(supplied with

Scanner Block)

Logic Module

Scanner Block

Housing

Lower Cover

(supplied with

Scanner Block)

LIGHT/DARK

Operate Select

Logic

Timing

Adjustment

Power

Block

Wiring

Terminals

3- and 4-wire Systems (pages 6 through 23)

Scanner Blocks

Model

Sensing Mode

Range

SBE & SBR1

SBED & SBRD1

SBEX & SBRX1

SBEV & SBRX1

SBEXD & SBRXD1

Opposed: high speed

Opposed: high speed, narrow beam

Opposed: high power, long range

Opposed: visible beam

Opposed: high power, wide beam angle

150 feet

10 feet

700 feet

100 feet

30 feet

SBLV1

SBLVAG1

SBL1

SBLX1

Retroreflective: high speed, visible beam

Retroreflective: polarized beam (anti-glare)

Retroreflective: high speed, infrared beam

Retroreflective: high power, long range

30 feet

15 feet

30 feet

100 feet

SBD1

SBDL1

SBDX1

SBDX1MD

Diffuse (proximity): high speed

Diffuse (proximity): medium range

Diffuse (proximity): high power, long range

Diffuse (proximity): wide beam angle

12 inches

24 inches

6 feet

24 inches

SBCV1

SBCVG1

Convergent beam: high speed, visible red

1.5-inch focus

Convergent beam: high speed, visible green 1.5-inch focus

SBC1

SBC1-4

SBC1-6

Convergent beam: high speed, infrared

1.5-inch focus

4-inch focus

6-inch focus

SBCX1

SBCX1-4

SBCX1-6

Convergent beam: high power, infrared

1.5-inch focus

4-inch focus

6-inch focus

SBEF & SBRF1

Opposed fiber optic (glass fibers): high speed see specs

SBEXF & SBRXF1 Opposed fiber optic (glass fibers): high power see specs

SBFX1

SBF1

SBF1MHS

SBFV1

SBFVG1

Fiber optic (glass fibers): high power, infrared see specs

Fiber optic (glass fibers): high speed, infrared see specs

Fiber optic (glass fibers): very high speed

see specs

Fiber optic (glass fibers): visible red

see specs

Fiber optic (glass fibers): visible green

see specs

SBAR1

SBAR1GH

SBAR1GHF

Ambient light receiver

Ambient light receiver: high gain

Ambient light receiver: for glass fiber optics

see specs

Response

1 millisecond

10 milliseconds

1 millisecond

10 milliseconds

1 millisecond

10 milliseconds

1 millisecond

10 milliseconds

1 millisecond

10 milliseconds

1 millisecond

0.3 millisecond

1 millisecond

10 milliseconds

Page

p. 7

p. 8

p. 9

p. 10

p. 11

p. 12

p. 13

p. 14

▷