English
Language : 

S-1111A Datasheet, PDF (3/7 Pages) List of Unclassifed Manufacturers – ROTARY CODED SWITCHES
COPAL ELECTRONICS
S-1000A/2000A
ROTARY CODED SWITCHES
˙STANDARD SPECIFICATIONS
Circuit type
BCD (Real code, complementary code)
BCH (Real code, complementary code)
Operating temperature range
Storage temperature range
−40 ~ 85 °C
Sealing
Net weight
Washable by “O” ring
Approx. 0.87 g
(S-1010A, S-1030A, S-2010A, S-2030A)
Approx. 1.13 g
(S-1011A, S-1031A, S-2011A, S-2031A)
Approx. 0.97 g
(S-1110A, S-1130A, S-2110A, S-2130A)
Approx. 1.23 g
(S-1111A, S-1131A, S-2111A, S-2131A)
Approx. 1.02 g
(S-1210A, S-1230A, S-2210A, S-2230A)
Approx. 1.28 g
(S-1211A, S-1231A, S-2211A, S-2231A)
˙MECHANICAL CHARACTERISTICS
No. of positions
Adjustment torque
Stepping angle
Terminal strength
Solderability
16 (S-1000A), 10 (S-2000A)
13 mN·m {133 gf·cm} minimum
22.5° (S-1000A), 36° (S-2000A)
15 N {1.53 kgf} minimum
245 ± 3 °C, 2 ~ 3 s
Soldering heat
Flow : 260 ± 3 °C as the temperature in
a pot of molten solder, immer-
sion from head of terminal to
backside of board, 5 ~ 6 s, two
times maximum
Manual solderingɿ
380 ± 10 °C, 3 ~ 4 s
{ } : Reference only
˙ELECTRICAL CHARACTERISTICS
Contact rating
Non-switching
Switching
Minimum
DC50 V 100 mA
DC5 V 100 mA
DC20 mV 1 μA
Contact resistance
Insulation resistance
Dielectric strength
100 mΩ maximum
1000 MΩ (DC100 V) minimum
AC300 V, 60 s
˙ENVIRONMENTAL CHARACTERISTICS
Vibration
Amplitude 1.5 mm or Acceleration 98 m/s2,
10-500-10 Hz, 3 directions for 2 h each
Shock
Load life
Humidity (Steady state)
High temperature exposure
490 m/s2, 11 ms
6 directions for 3 times each
10000 steps
DC5 V, 100 mA
Resistance load DC50V 100mA
60 °C, Relative humidity 90 ~ 95 %, 1000 h
85 °C, 1000 h
Low temperature exposure
− 40 °C, 96 h
Thermal shock
− 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles
˙ Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.