R114165000 Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – RIGHT ANGLE PLUG CLAMP TYPE

TECHNICAL DATA SHEET
RIGHT ANGLE PLUG CLAMP TYPE
CABLE 2.6/50+75 S
COMPONENTS
Cap
Clamp nut
Washer 1 _{Washer 2}
3/3
R114.165.000
Series : SMB
Gasket
Braid-clamp
Body
1
3
Slide the back nut,the washer1 ,the gasket,the washer2 onto
the cable.
Strip the cable.
Cut 2 slits in the jacket if necessary.
Screw sub-assembly into the connector body with the
adapted wrench.
Recommended coupling torque (see connector TDS).
Solder the inner conductor.
2 slits at 180°
2
Mount the braid-clamp
Trim braid toØ of braid-clamp
Stripp off the dielectric
4
Place the cap into the body.
Press on the cap flush or slightly below the surface of
the body assembly.
Issue : 0050 Q
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.