LED-35W Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Narrow cross-section fits T5-style ballast channels Off-line Switch Mode LED Drivers

“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Minimum
0 mA
-2.0 V
Typical
—
—
Maximum
0.5 mA
+15 V
LED35W Series
SSL Solutions Faster Than The Speed Of Light^®
Pg 3 of 4
Typical Dimming Circuit
Dim (+) Purple
LED35W-xxx-Cxxxx-D
IP710
Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
100
90
80
70
60
50
40
30
20
10
0
0V
Output Current / 0-10VDC Dimming Input
1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming Input (Vdc)
Notes:
1. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
2. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
3. 0-10V dimmable version output will be <_ 10% @ 0-1.0V
4. 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com