LC1K0910M7 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – TeSys K contactor

Complementary
Control circuit voltage limits
Inrush power in VA
Hold-in power consumption in VA
Heat dissipation
Auxiliary contacts type
Signalling circuit frequency
Minimum switching current
Minimum switching voltage
Non overlap distance
Insulation resistance
[Ui] rated insulation
voltage
Electrical durability
Mounting support
Standards
Product certifications
Connections - terminals
Tightening torque
Operating time
Safety reliability level
Mechanical durability
Operating rate
600 V for signalling circuit conforming to CSA C22.2 No
14
600 V for power circuit conforming to CSA C22.2 No 14
600 V for signalling circuit conforming to UL 508
690 V for signalling circuit conforming to IEC 60947-5-1
690 V for signalling circuit conforming to IEC 60947-4-1
690 V for power circuit conforming to IEC 60947-4-1
600 V for power circuit conforming to UL 508
1.3 Mcycles 9 A AC-3 at Ue <= 440 V
0.18 Mcycles 20 A AC-1 at Ue <= 440 V
Plate
Rail
BS 5424
IEC 60947
NF C 63-110
VDE 0660
CSA
UL
Screw clamp terminals 2 cable(s) 0...0 in² (0.34...1.5
mm²) - cable stiffness: flexible - with cable end
Screw clamp terminals 2 cable(s) 0...0.01 in² (0.75...4
mm²) - cable stiffness: flexible - without cable end
Screw clamp terminals 2 cable(s) 0...0.01 in² (1.5...4
mm²) - cable stiffness: solid
Screw clamp terminals 1 cable(s) 0...0 in² (0.34...2.5
mm²) - cable stiffness: flexible - with cable end
Screw clamp terminals 1 cable(s) 0...0.01 in² (0.75...4
mm²) - cable stiffness: flexible - without cable end
Screw clamp terminals 1 cable(s) 0...0.01 in² (1.5...4
mm²) - cable stiffness: solid
11.5 lbf.in (1.3 N.m) - on screw clamp terminals - with
screwdriver flat Ø 6 mm
11.5 lbf.in (1.3 N.m) - on screw clamp terminals - with
screwdriver Philips No 2
10...20 ms coil energisation and NO closing
10...20 ms coil de-energisation and NO opening
B10d = 20000000 cycles contactor with mechanical load
conforming to EN/ISO 13849-1
B10d = 1369863 cycles contactor with nominal load
conforming to EN/ISO 13849-1
10 Mcycles
3600 cyc/h
0.2...0.75 Uc at <= 122 °F (50 °C) drop-out
0.8...1.15 Uc at <= 122 °F (50 °C) operational
30 VA at 68 °F (20 °C)
4.5 VA at 68 °F (20 °C)
1.3 W
Type instantaneous (1 NO)
<= 400 Hz
5 mA for signalling circuit
17 V for signalling circuit
0.02 in (0.5 mm)
> 10 MOhm for signalling circuit
3