HW-G10 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Oiltight Switches and Pilot Devices

Oiltight Switches and Pilot Devices
HW Series: 22mm
Non-Illuminated Pushbuttons (Sub-Assembled)
Contact Blocks
+
Adaptor & Safety
Lever Lock
+
Anti-Rotation
Ring
+
Operator
+ Button = Complete Part
A
Part Numbers: Operators
Style
Round Flush/Extended
Plastic Bezel Metal Bezel
Momentary HW1B-M0
HW4B-MO
Part Numbers: Contact Blocks
Style
1NO
Standard Fingersafe Contacts
(IP20)
HW-F10
1NC
HW-F01
HW-F10R HW-F01R
(early make) (late break)
Part Numbers: Buttons
Style
Part Number
Round Flush
HW1A-B1-➀
Round Extended
Maintained HW1B-A0
HW4B-AO
Spring-Up Terminal Contacts
HW1A-B2-➀
Ø 29mm Mushroom
Ø 40mm Mushroom
Momentary HW1B-M0L HW4B-MOL
HW-G10
HW-G01
HW-G10R HW-G01R
(early make) (late break)
Ø 29mm
Mushroom Cap
HW1A-B3-➀
Maintained HW1B-A0L HW4B-AOL
Ø 60mm Jumbo Mush-
room
Momentary HW1B-M5-➀*
–
Square Flush Extended
Momentary HW2B-M0
–
Maintained ^HW2B-A0
–
1. In place of ➀, specify the Button Color
Code from table below.
2. *60mm mushroom operator includes
non-removable button (available in red,
black, green and yellow only).
3. For nameplates and accessories, see
page A-113.
4. For dimensions, see page A-116.
① Button Color Code
Color
Code Color
Code
Black
B
White
W
Green
G
Yellow
Y
Red
R
Grey
N^†
Blue
S
1. HW1B-M5 available only in black, red
green and yellow.
2. ^†Grey available for round flush only.
Exposed Screw Terminal
Contacts
HW-C10
HW-C01
HW-C10R HW-C01R
(early make) (late break)
Ø40mm
Mushroom Cap
HW1A-B4-➀
Dummy Block
TW-DB
Square Flush
HW2A-B1-➀
Square Extended
HW2A-B2-➀
1. All assembled part numbers in catalog include
standard (HW-F...) contacts.
2. Assembled units with spring-up terminals
(HW-G...) can be ordered by removing an “F”
from the part number (Ex. HW1B-M1F11-R
becomes HW1B-M111-R).
3. Units with exposed screw terminals (HW-C...)
Part Number: Contact
Block Mounting Adaptor
(safety lever lock included)
Style
Part
Number
must be ordered as sub-components.
4. All contacts (including non-fingersafe versions)
are UL, CSA, and IEC compliant and carry the
CE mark.
HW-CB2C
Part Numbers: Anti-Rotation Ring
Appearance
Part Number
HW9Z-RL
Use with notched panel cutout
to prevent unit rotation.
1. Used to mount con-
tact blocks to oper-
ator (first pair only).
2. IDEC strongly recommends
using the safety lever lock
(included) to prevent heavy
vibration or maintenance per-
sonnel from inadvertently
unlocking contacts.
www.idec.com
USA: (800) 262-IDEC or [phone], Canada (888) 317-IDEC
A-79