GPS100 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – GPS Receiver

C-MAX Time Solutions
Data Sheet GPS100
If “Sync Time” is chosen, “Sync sec” will be turned on automatically.
If “Sync sec” is activated, an automatic fine tuning of frequency and time pulse will be done in
addition to adjustment of the second impulse to UTC.
A precision of ±0.1ppm will be accomplished after max. 30 minutes. If a highly deviating value
has been adjusted previously, the display “locked” might appear and disappear in uneven
periods.
NOTE:
Before disconnecting
the RJ45 connector,
the GPS SYNC must
be switched OFF or
the whole unit must
be turned OFF.
2. Technical Information / RJ45 pinning
Supply voltage
Outside dimensions
Symbol
Rx +
Rx (-)
Tx (+)
PPS (-)
PPS (+)
Tx (-)
Vcc
GND
Function
Reception (+)
Reception (-)
Transmission (+)
Negative signal per second
Positive signal per second
Transmission (-)
Supply voltage
Ground
Pin #
1
2
3
4
5
6
7
8
3. Ordering information
Part no.
GPS100
Description
GPS receiver
15V
65x122x42 mm
1
2
3
4
RJ45
5
connector
6
7
8
SPEC No.
GPS100
Revision
A1
State
02.06.2005
C-MAX printed
03.05.2007
Version
English
Page
3 of 4