FXP07090100A Datasheet, PDF (3/11 Pages) List of Unclassifed Manufacturers – Flexible PCB Penta Band GSM Antenna 100mm 1.13 cable Right angle MMCX connector

3. Electrical Property
3.1 Mounting instructions and ground-plane connection
 
Peel back 3m paper. On the underside of the antenna is
automotive grade 3m adhesive (glue) for sticking the FXP.07
directly to plastic (e.g. housing). The antenna can be curved
around housing but should not be folded sharply
Ground connection - this small
square pad at the bottom of the
FXP.07 can be seen when paper
is removed.
This should be connected to
extra ground or metal to increase
efficiency (e.g. allow pad to
touch the side of a PCB like
the picture above.
 
This is the antenna trace or signal
feed and should be allowed to be
free from the PCB and allowed
to exist in free area on non metal
area (plastic housing)
SPE-12-8-051/A/ZL | page 3 of 11