EAGE240-7KCV24 Datasheet, PDF (3/16 Pages) List of Unclassifed Manufacturers – COMPLETE UNIT WITH 3 FONTS AND INTELLIGENT CONTROLLER

INTEGRATED FONTS
Each graphics unit has three integrated
character sets. The characters in these
sets can be used at their normal height or
can increased up to eight times, while their
width can be increased from two to eight
times, irrespective of the height.
GRAPHIC UNIT
Font 1: 4x6
In addition, you can define up to twenty-one
characters of your own, depending on the
font being used. These characters will
remain until the supply voltage is switched
off. (See command ‘E’.)
Each character can be placed precisely to
the pixel. A combination of text and
graphics can be displayed as required.
Several different font sizes can also be
displayed together.
Font 2: 6x8
Font 3: 8x16
TIP: FONT EFFECTS
With large fonts, the command ‘T’, TEXT mode (link, pattern),
can be used to produce interesting effects through overlaying
(writing and offsetting a word several times).
When the “outline font” is overlaid
again (EXOR) at pos. 2,2, this results
in an “outline font with filling”.
Original font 8x16 with ZOOM 3
at position 0,0 with black pattern
“Outline font” resulting from
overlaying (EXOR) at pos. 1,1.
Overlaying (OR) with 50% gray
pattern of the “outline font” at pos. 0,0
results in a “font with pattern filling”.
3