A-L3A Datasheet, PDF (3/6 Pages) List of Unclassifed Manufacturers – Lock Kit for Cla mp Cover Junction Boxes

Locks, Lockouts, Latches, Handles and Clamps Latches
Latches
T-Handle Latch and Keyed Cylinder Lock Kits
To install, simply remove the
standard slotted latch and insert
the kit. Complete installation
instructions are furnished. Catalog
number AL7A includes a Type L7 T
handle and all hardware. Catalog
number AL12AR includes a Type L12
cylinder lock, cam and all hardware.
Latch and lock fit Type 1 enclosures
and hinged-cover pull boxes.
Bulletin: A80
Catalog Number
AL7A
AL12AR
Description
T handle latch kit
Cylinder lock kit
Latch Kit for One-Door Type 12 Enclosures
Designed for field installation on most standard one-door Type
12 enclosures. These latch kits will not fit Hoffman disconnect,
CONCEPT™  or PROLINE™  enclosures. Each kit includes a handle,
latch, latch rods, adjustable rod guides and all hardware. The latch
rods can be adjusted to maintain the proper gasket compression by
relocating the pins in the rod guides. When the pin is removed, the
latch rod can also be removed. These kits are available with a key
locking handle, a non-locking handle or a padlocking handle. All
openings through the door are gasketed to assure a complete seal.
Ends of latch rods have rollers for easier door closing.
Bulletin: A80
Catalog
Number
AL36A
AL2A
AL2ACCW
AL3A
AL36BR
AL2BR
AL2BCCW
AL3BR
AL36CR
AL2CR
AL2CCCW
AL3CR
AL36DR
AL2DR
AL2DCCW
AL3DR
Handle
Type
Padlock
Keylock
Keylock
Non-
Locking
Padlock
Keylock
Opens
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Either Clockwise or
Counterclockwise
Clockwise
Keylock Counterclockwise
Non-
Locking
Padlock
Keylock
Keylock
Non-
Locking
Padlock
Keylock
Keylock
Non-
Locking
Clockwise
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Either Clockwise or
Counterclockwise
Clockwise
Counterclockwise
Clockwise
Description
1-point Latch kit
1-point Latch kit
1-point Latch kit
1-point Latch kit
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch Kit where A is 16, 20, 24
or 30 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 36, 42 or 48 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
3-point Latch kit where A is 60 or 72 in.
See price list for factory installation charges. A is enclosure height.
Latch Kits for Type 4 and 12 Enclosures
Fits Type 4 and 12 enclosures which have external screw clamps.
Requires only a quarter-turn (90 degrees) to open or close. An
internal O-ring and external gasket assure a water-tight and dust-
tight seal. Installation requires a hole punched or drilled in the
door for each latch. Complete instructions are furnished. A square
or triangular key is required for tamper-resistant latches. Latch is
die-cast zinc with chrome finish.
Bulletin: A80
Catalog Number
AL31
AL32
AL32Y
AL35
AL35Y
Description
Slotted insert
7-mm square insert
Key for AL32
7-mm triangle insert
Key for AL 35
Toggle Latch for Type 4 and 4X Floor-Mount and Free-Stand Enclosures
Provides quick access to Type
4 and 4X floor-mount and free-
stand enclosures with clamps. The
3/8-16 threaded, stainless steel
toggle latches replace the standard
stainless steel bolts. Operation of
the toggle releases the door clamp
so the door can be opened without
tools. Two Type 316 stainless steel
toggle assemblies included.
Catalog Number
AFT44XSS
Bulletin: A80
Description
2 toggle latches
3
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00479 G