900160J061RN Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – CARTRIDGE TYPE LED LAMPS

900/901 SERIES CARTRIDGE TYPE
Neon Lamps
Overview
The 900 Series neon cartridge lamp mates with 910 Series
lampholders. Constructed with an aluminum case, the 900/
901 series neon lamps are ideally suited for 125 volt
applications. The 901 series cartridge lamps are 0.125"
longer than the 900 series to accept blue or green neon
lamps and mate with the 911 series lampholders. Please
consult the table below.
Approvals
UL Recognized and CSA Certified.
Specifications
Sleeve: Aluminum. Clear anodized finish standard. Black
anodized finish optional.
Termination: .040" dia. stainless steel pins mounted in nylon
header.
Voltage options: Std. Brightness, 105 to 125 AC or DC
volts. High Brightness, 110 to 125 AC volts. Green Neon,
115 to 125 AC or DC volts. Blue Neon, 105 to 125 AC volts
or 105 to 150 DC volts.
Lens: Heat resistant, high strength polycarbonate. When
type 03 (short cylindrical) lens is used in a 910 or 911 Series
holder with a screw-on lens cap, specify "colorless
nondiffusing" for 03 lens color. Lens Marking: Cylindrical
lenses may be stamped. Contact factory.
Lens Type
01
03
04
07
Dimension A in Inches (Max.)
900 Series
901 Series
1.328
1.453
1.140
1.265
1.328
1.453
1.140
1.265
.453
±.015
A
.203
±.015
.265
±.015
A
.203
±.015
TYPE 04
TYPE 03
LONG CYLINDRICAL LENS
SHORT CYLINDRICAL LENS
TYPE 07
SHORT CYLINDRICAL
.330
±.010
FLUTED LENS
.284
A
.453
.203
±.005
±.015
±.015
.020 ±.005
TYPE 01
LONG STOVEPIPE LENS
.160 ±.002
ORDERING INFORMATION:
EXAMPLE: 900 1 50 X 01 2 AN
Series
Number
900
901
Termination
1
Stainless
steel pins
standard
A
Tin-plated
stainless
steel pins
for printed
circuit board
mounting
Standard Brightness
A9A Lamp
No Built-in Resistor
Lamp Code
Resistor
Code Internal Resistor Value
Note: Reference Lamp
Selection Guide.
X⁵ No Built-In Resistor
C 56K OHM, 3K Life Hrs.
52¹ Standard
E 100K OHM, 15K Life Hrs.
Brightness A1B T 150K OHM, 25K Life Hrs.
X⁵ No Built-In Resistor
53¹ High Brightness A 22K OHM, 5K Life Hrs.
A1C
S 33K OHM, 25K Life Hrs.
C 56K OHM, 25K Life Hrs.
50² Standard
Brightness
A9A (NE2E)
X⁵ No Built-In Resistor
51² High Brightness
C2A (NE2H)
X⁵
No Built-In Resistor
56³ Green Neon
B 30K OHM, 10K Life Hrs.
57⁴ Blue Neon
B 30K OHM, 10K Life Hrs.
Long Stovepipe Lens
Lens Type
Clear Anodized Amber Non-
Finish
diffusing Lens
Sleeve Finish Lens Color
01⁶ Long Stovepipe
1
Nondiffusing
(Clear)
03 Short Cylindrical
04 Long Cylindrical
07⁷ Short Cylindrical
Fluted
Black
Anodized
2
Clear (Silver)
Anodized
Standard
AN Amber
CN Colorless
RN Red
WN White
YN Yellow
BN⁸ Blue
GN⁸ Green
1 _{Use with lens colors AN, CN, RN, WN, or YN.}
2 _{For use on 900 series only with type 01 and 04 lenses.}
3 _{For use on 901 series only with lens colors GN, CN, or WN.}
4 _{For use on 901 series with lens colors BN, CN, or WN.}
5 _{External resistor required.}
6 _{Best suited for wide angle viewing.}
7 _{Recommended for best light distribution.}
8 _{For 901 series only when used with blue or green lamp}
respectively.
· · Lighting Components & Design, Inc.® 692 S. Military Trail, Deerfield Bch., FL 33442 TEL: [phone] FAX: [phone]
Littelites
LL-5