777D10896-108 Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film Capacitors^TM
UL Recognized Part Series 777D
SBE Part 777D10896-108
Mechanical Mounting and Additional Thermal Notes:
This capacitor is optimized for extremely low self
inductance when connected to a suitable laminar bus
structure.The capacitor internal heating is VERY small,
and other bus structure heat sources are very likely
significantly higher than the heat added to the bus by
the capacitor.Capacitor dissipation is approximately
5W at 200Arms, from 1-100KHz.
It is highly recommended to use infrared thermal
imaging from a system cold start to determine the
location and relative magnitude of thermal input to
the bus.The capacitor may well function as a thermal
conduit for bus structure heat, and it will be very
possible that the capacitor internal hot spot is less
than the terminal temperature. Thermal contour maps
are available for some representative conditions.
Layout Details:
NOTES:
REV.
1. Minimum Clearance Through Air: 17.20mm
2. Minimum Clearance Over Surfaces: 25.40mm
01
DESCRIPTION
Initial Release
Revisions
CHG CHK APR
BY BY BY
-
-
-
DATE
-
174.45
Bolt Circle
7X 45.0°
7X 22.5°
A
C
16X M5X0.8 - 6H THRU
28 in-lbs MAX Torque
0.50 A B C
B
222.15
Bolt Circle
214.00
25.40
12.70
16.84
7.11
DETAIL A
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SBE. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SBE IS PROHIBITED.
MATERIAL
Contact SBE Inc. to discuss your specific requirements.
1.00
16 Surfaces
A
9.21
54.21
NON-TOLERANCED DIMENSIONS ARE BASIC
1.00 A B C
UNLESS OTHERWISE SPECIFIED:
ALL DIMENSIONS ARE IN MM
SBE, INC.
81 PARKER ROAD
BARRE, VT 05641 USA
802.476.4146 FAX: [phone]
TITLE
Power Ring Capacitor,
1000uF, 600VDC ^{GEOMETRIC TOLERANCING PER: Y14.5-2009}
DRAWN
CHECKED
ENG APPR.
Nathan
AGH
MSB
12/8/2013
12/12/2013 ^{DWG. NO.}
12/12/2013 ^777D108LV
FINISH
DO NOT SCALE DRAWING ^SIZE A ^REV 01 SHEET 1 OF 1
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®